Schlumberger

5 7/8 in MDSiR613(149.225 mm)

Product ID: 65852A0001 ER 26197


Design Specifications

Total Cutters42
Rolling Cutter Countn/a
Cutter Size13mm (1/2 in)
Face Cutters(15) 13mm
Gauge Cutters(8) 13mm
Cone Cutters(7) 13mm
Back-Up Cutters(12) 13mm
Blade Count6
Nozzles3 Standard Series 50N
Bit Connection3 1/2 Reg
Junk Slot Area, in24.287
GaugeLength: 2" Protection: Options Available
LengthMake-Up: 8.139 Overall: 11.826
Fishing NeckDiameter: 4.75 Length: 3.556

Operating Parameters

Bit SpeedSuitable for Rotary & PDM
Weight-on-Bit4,000 To 30,000 (lbs)
1,818 To 13,635 (daN)
2 To 14 (Tonnes)
Flow Rate galUs/min250 To 600
Hydraulic Horsepower, HSI1 To 6
Recommended Make-up Torque6,600 To 9,850 pound ft
The operating parameters listed here are general parameters, please contact your local Smith Bits representative for precise recommendations for your individual well.

style

style

The ONYX 360 rolling cutter feature allows the PDC element to rotate enabling the full circumference of the diamond edge to be utilized. This prevents a wear flat developing in only one place thereby maintaining cutter sharpness for improved drillbit durability.

The PX feature places thermally stable diamond inserts (TSP) on the gauge to maximize gauge retention and extend bit life.

Low Exposure (MDOC – Managed Depth Of Cut) Cutter backing raised to minimize excessive depth of cut because of formation heterogeneity to reduce cutter loading and minimize torque in transitional drilling. Minimizes cutter breakage and extends bit life.