9 7/8 in FK57(250.825 mm)

Product ID: 00341724 ER 7556 IADC 637Y

Design Specifications

Bearing TypeSpinodal™ 2 Bearing
Seal TypeV-Ramp O-Ring Seals
Bit Connection Type6 5/8 Reg
Journal Angle (°)36
Offset (inches)0.062
RowsTotal: 14 Inner: 11 Gage: 3
Inserts/TeethTotal: 180 Inner: 122 Gage: 58

Operating Parameters

Weight on Bit30,000 To 70,000 (lbs)
13,635 To 31,815 (daN)
14 To 32 (Tonnes)
Rotary Speed (RPM)160 To 50
The operating parameters listed here are general parameters, please contact your local Smith Bits representative for precise recommendations for your individual well.



The geometry of conical inserts is optimized to reduce insert breakage and maximize ROP in WOB sensitive formations.

The V-Ramp seal's unique design distributes contact pressure over a wider contact area ensuring a more consistent track on the bit leg. This results in extended seal life which allows the bit to stay in the hole longer and drill more footage.

Spinodal 2 bearing ensures longer runs at higher ROP. This proprietary material offers maximum wear resistance and withstands extreme load forces for longer periods than conventional bearing materials.

Diamond enhanced heel inserts maintain gauge in abrasive, hard formation drilling and significantly increase cone durability. This feature extends bit life and ensures that a full gauge hole is drilled.