Schlumberger

8 1/2 in FHK35ODV(215.9 mm)

Product ID: 0061790010 ER 8394 IADC 547X


Design Specifications

Bearing TypeSpinodal* 2 Bearing w/Silver Plated Components
Seal TypeHigh Temperature Fabric Competent Seal
Bit Connection Type4 1/2 Reg
Journal Angle (°)32.5
Offset (inches)0.219
RowsTotal: 14 Inner: 11 Gage: 3
Inserts/TeethTotal: 152 Inner: 102 Gage: 50

Operating Parameters

Weight on Bit20,000 To 55,000 (lbs)
9,090 To 24,998 (daN)
9 To 25 (Tonnes)
Rotary Speed (RPM)50 To 250
The operating parameters listed here are general parameters, please contact your local Smith Bits representative for precise recommendations for your individual well.

style

style

Advanced fabric composite seals and specialized high temperature grease designed with improved heat and wear resistance to enhance bit life at elevated temperatures.

Diamond enhanced heel inserts maintain gauge in abrasive, hard formation drilling and significantly increase cone durability. This feature extends bit life and ensures that a full gauge hole is drilled.

V-Flo™ directs nozzles to the leading side of the following bit cone to maximize cleaning. The resulting upward spiral flow enhances bottom hole cleaning, prevents bit balling and allows the bit to drill at maximum ROP.

Spinodal 2 bearing with silver plated components ensures longer runs at higher ROP. This proprietary material offers maximum wear resistance and withstands extreme load forces for longer periods than conventional bearing materials.