9 7/8 in FHK30VPD(250.825 mm)

Product ID: 0060673010 ER 8182 IADC 537X

Design Specifications

Bearing TypeSpinodal* 2 Bearing w/Silver Plated Components
Seal TypeHigh Temperature Fabric Competent Seal
Bit Connection Type6 5/8 Reg
Journal Angle (°)32.5
Offset (inches)0.281
RowsTotal: 13 Inner: 10 Gage: 3
Inserts/TeethTotal: 146 Inner: 96 Gage: 50

Operating Parameters

Weight on Bit25,000 To 65,000 (lbs)
11,362 To 29,542 (daN)
11 To 29 (Tonnes)
Rotary Speed (RPM)160 To 50
Recommended Make-up Torque47,300 To 47,800 pound ft
The operating parameters listed here are general parameters, please contact your local Smith Bits representative for precise recommendations for your individual well.



Advanced fabric composite seals and specialized high temperature grease designed with improved heat and wear resistance to enhance bit life at elevated temperatures.

V-Flo™ directs nozzles to the leading side of the following bit cone to maximize cleaning. The resulting upward spiral flow enhances bottom hole cleaning, prevents bit balling and allows the bit to drill at maximum ROP.

Diamond Leg Back Protection

Spinodal 2 bearing with silver plated components ensures longer runs at higher ROP. This proprietary material offers maximum wear resistance and withstands extreme load forces for longer periods than conventional bearing materials.