Schlumberger

12 1/4 in Z516(311.15 mm)

Product ID: 66475A0001 ER 26691


Design Specifications

Total Cutters43
Total Stinger Element Count34
Stinger Element Size9/16 in
Cutter Size16mm (5/8 in)
Face Cutters(24) 16mm
Gauge Cutters(5) 16mm
Cone Cutters(14) 16mm
Blade Count5
Nozzles7 Standard Series 60N, 1 Standard Series 50N
Bit Connection7 5/8 Reg
Junk Slot Area, in243.708
GaugeLength: 3" Protection: Options Available
LengthMake-Up: 11.151 in Overall: 16.089 in
Fishing NeckDiameter: 7.88 in Length: 3.448 in

Operating Parameters

Bit Speed140 To 300 RPM
Weight-on-Bit7,500 To 40,000 (lbs)
3,409 To 18,180 (daN)
3 To 18 (Tonnes)
Flow Rate galUs/min500 To 1200
Hydraulic Horsepower, HSI1 To 6
Recommended Make-up Torque16600 To 21600 pound ft
The operating parameters listed here are general parameters, please contact your local Smith Bits representative for precise recommendations for your individual well.

style

style

Bit design and performance have been certified through the validation process prescribed by IDEAS simulation technology.

The Stinger's unique conical geometry delivers high point loading to fracture tough-to-drill formations more efficiently.

Placed on the blade, Stinger conical diamond elements offer improved impact resistance when drilling through inter-bedded formations or when hard inclusions such as chert or conglomerates are encountered.

The center location of the Stinger conical diamond in the bit enhances its stability to mitigate whirl and other artifacts that waste energy and reduce ROP. The Stinger element also provides an efficient mechanism to drill the very center of the borehole.

Bit design is available with RockStorm PDC technology. These all-in-one cutters break the paradigm and provide ultimate wear resistance and ultimate impact resistance in the same PDC cutter. As a result, faster drilling rates are delivered while increasing overall run length.