Schlumberger

12 1/4 in Z8(311.15 mm)

Product ID: 66364A0001 ER 26601


Design Specifications

Total Cutters123
Total Stinger Element Count107
Stinger Element Size9/16 in
Cutter Size13mm (1/2 in)
Face Cutters(88) 13mm
Gauge Cutters(8) 13mm
Cone Cutters(19) 13mm
Back-Up Cutters(8) 13mm
Blade Count8
Nozzles8 Standard Series 60N
Bit Connection6 5/8 Reg
Junk Slot Area, in227.615
GaugeLength: 5" Protection: Options Available
LengthMake-Up: 13.044 in Overall: 17.982 in
Fishing NeckDiameter: 8 in Length: 3.571 in

Operating Parameters

Bit Speed140 To 300 RPM
Weight-on-Bit4,000 To 35,000 (lbs)
1,818 To 15,908 (daN)
2 To 16 (Tonnes)
Flow Rate galUs/min500 To 1000
Hydraulic Horsepower, HSI1 To 6
Recommended Make-up Torque47300 To 47800 pound ft
The operating parameters listed here are general parameters, please contact your local Smith Bits representative for precise recommendations for your individual well.

style

style

Bit design and performance have been certified through the validation process prescribed by IDEAS simulation technology.

The Stinger's unique conical geometry delivers high point loading to fracture tough-to-drill formations more efficiently.

Placed on the blade, Stinger conical diamond elements offer improved impact resistance when drilling through inter-bedded formations or when hard inclusions such as chert or conglomerates are encountered.

The center location of the Stinger conical diamond in the bit enhances its stability to mitigate whirl and other artifacts that waste energy and reduce ROP. The Stinger element also provides an efficient mechanism to drill the very center of the borehole.

Bit design is available with RockStorm PDC technology. These all-in-one cutters break the paradigm and provide ultimate wear resistance and ultimate impact resistance in the same PDC cutter. As a result, faster drilling rates are delivered while increasing overall run length.