12 1/4 in Z619(311.15 mm)

Product ID: 66503A0001 ER 26730

Design Specifications

Total Cutters41
Total Stinger Element Count33
Stinger Element Size9/16 in
Cutter Size19mm (3/4 in)
Face Cutters(28) 19mm
Gauge Cutters(7) 19mm
Cone Cutters(6) 19mm
Blade Count6
Nozzles6 Standard Series 60N
Bit Connection6 5/8 Reg
Junk Slot Area, in239.218
GaugeLength: 3" Protection: Options Available
LengthMake-Up: 13.257 in Overall: 18.195 in
Fishing NeckDiameter: 8 in Length: 5.131 in

Operating Parameters

Bit Speed140 To 300 RPM
Weight-on-Bit15 To 35 (lbs)
7 To 16 (daN)
To (Tonnes)
Flow Rate galUs/min600 To 900
Hydraulic Horsepower, HSI1 To 6
Recommended Make-up Torque47,300 To 47,800 pound ft
The operating parameters listed here are general parameters, please contact your local Smith Bits representative for precise recommendations for your individual well.



Bit design and performance have been certified through the validation process prescribed by IDEAS simulation technology.

The Stinger's unique conical geometry delivers high point loading to fracture tough-to-drill formations more efficiently.

Placed on the blade, Stinger conical diamond elements offer improved impact resistance when drilling through inter-bedded formations or when hard inclusions such as chert or conglomerates are encountered.

Bit design is available with RockStorm PDC technology. These all-in-one cutters break the paradigm and provide ultimate wear resistance and ultimate impact resistance in the same PDC cutter. As a result, faster drilling rates are delivered while increasing overall run length.

Placing thermally stable diamond inserts (TSP) on the gauge maximizes gauge retention and extends bit life.