8 1/2 in Z516(215.9 mm)

Product ID: 66704A0001

Design Specifications

Total Cutters37
Total Stinger Element Count28
Stinger Element Size9/16 in
Cutter Size16mm (5/8 in)
Face Cutters(25) 16mm
Gauge Cutters(10) 16mm
Cone Cutters(2) 16mm
Blade Count5
Nozzles5 Standard Series 50N
Bit Connection4 1/2 Reg
Junk Slot Area, in213.159
GaugeLength: 3" Protection: Options Available
LengthMake-Up: 9.968 Overall: 14.156
Fishing NeckDiameter: 6 Length: 3.483

Operating Parameters

Bit Speed140 To 300 RPM
Weight-on-Bit18,000 To 32,000 (lbs)
8,181 To 14,544 (daN)
8 To 14 (Tonnes)
Flow Rate galUs/min500 To 600
Hydraulic Horsepower, HSI1 To 6
Recommended Make-up Torque16,600 To 21,600 pound ft
The operating parameters listed here are general parameters, please contact your local Smith Bits representative for precise recommendations for your individual well.



Bit design and performance have been certified through the validation process prescribed by IDEAS simulation technology.

The Stinger's unique conical geometry delivers high point loading to fracture tough-to-drill formations more efficiently.

Placed on the blade, Stinger conical diamond elements offer improved impact resistance when drilling through inter-bedded formations or when hard inclusions such as chert or conglomerates are encountered.

The center location of the Stinger conical diamond in the bit enhances its stability to mitigate whirl and other artifacts that waste energy and reduce ROP. The Stinger element also provides an efficient mechanism to drill the very center of the borehole.

Bit design is available with RockStorm PDC technology. These all-in-one cutters break the paradigm and provide ultimate wear resistance and ultimate impact resistance in the same PDC cutter. As a result, faster drilling rates are delivered while increasing overall run length.