Schlumberger

Case Study: IntelliZone Compact System Cuts Rig Time, Prevents Water Breakthrough, and Saves Operator USD 400,000 per Well

Wells produce more than 99% oil with less than 1% water cut in marginal heterogeneous reservoir offshore east Malaysia

Challenge: Manage water encroachment and recover maximum oil for two wells in marginal heterogeneous, gas-capped reservoirs offshore east Malaysia.

Solution: Complete wells with IntelliZone Compact modular multizonal management system to actively control and monitor zonal contributions for optimal oil recovery.

Result: Produced more than 99% oil with less than 1% water cut, reduced installation time by two thirds that of conventional intelligent completions, experienced zero NPT, and saved USD 400,000 per well.

Optimize multizone production in marginal offshore oil field

An operator planned two wells in a marginal field offshore east Malaysia. The field consisted of multiple-dipping heterogeneous sandstone reservoirs with an unconsolidated formation. The multistacked reservoirs had a large gas cap with only marginal oil in place. Achieving maximum reservoir contact in this type of formation required horizontal wells.

Used IntelliZone Compact system to manage reservoir zones

After studying various well completion designs—including horizontal wells with passive versus active zonal control—Schlumberger recommended the IntelliZone Compact modular multizonal management system. This intelligent zonal flow control system would maximize reservoir drainage points and minimize overdepletion from the high-permeability, less productive zones, thereby enhancing reservoir performance and improving project economics. 

The IntelliZone Compact system continuously monitors the flow from individual zones and enables adjustments to zonal contribution. This flow control function prevents or minimizes water/gas encroachment, and in this case, it would also help control both the aggressive gas cap expansion at the heel of the well and, as the field depleted, the aquifer’s coning up from the dipping well toe. 

The modular, compact, integrated intelligent completion system is designed, assembled, and fully tested off site before shipment. Preconfiguring and pretesting accelerate final well commissioning at the rig site and, because there are fewer connecting joints and control line splices to make up on site, installation time and service quality incidents are significantly reduced. 

Upfront engineering analysis ensures that the valve-opening sizes and positions are tailored to the range of reservoir and production characteristics for the target well. The final completion assembly integrates multiple components, including flow control valves, zonal isolation packers, permanent pressure and temperature sensors, and a mechanism that provides absolute feedback of valve choke position—all into one assembly.

Produced more than 99% oil and saved USD 400,000 per well

Because the system arrived at the wellsite ready assembled, the company experienced zero NPT before and during installation. Installation rig time was reduced to just 33% of the time required by conventional passive intelligent completions—8 hours per zone instead of the typical 24 hours per zone. The time saved was approximately 32 hours for each well, an equivalent of USD 400,000 per well. Seven months after the intelligent completions were installed, the two wells were producing more than 99% oil with a water cut of less than 1%.


Download: IntelliZone Compact System Cuts Rig Time, Prevents Water Breakthrough, and Saves Operator USD 400,000 per Well (0.21 MB PDF)

Related services and products

 
Request More Information

Increased Production with Virtually No Water Cut from Marginal Reservoir

IntelliZone Compact System Cuts Rig Time, Prevents Water Breakthrough, and Saves Operator USD 400,000 per WellIntelliZone Compact System Cuts Rig Time, Prevents Water Breakthrough, and Saves Operator USD 400,000 per Well
PrevNextZoom1 of 2

Control Zones and Manage Flow in Intelligent Wells

Modular zonal management system
The IntelliZone Compact modular multizonal management system is a fully integrated flow control system for multizone wells. Visit IntelliZone Compact System page