Schlumberger

Case Study: Integrated Drilling Approach Saves Shell USD 1.1 Million, Achieves Record 275-ft/h ROP Salt Drilling Performance

Data-driven BHA design delivers 52% ROP increase compared with best offset well, deepwater Gulf of Mexico

Challenge: Maximize penetration rates while delivering highest-possible borehole quality in salt drilling operation in deepwater Gulf of Mexico.

Solution: Work with Schlumberger drilling experts to identify, evaluate, and deploy the technologies, processes, and workflows that will achieve the operator’s objectives.

Result:

  • Reached section TD 1.4 days ahead of AFE, saving USD 1.1 million.
  • Achieved an ROP of 275 ft/h [84 m/h], 52% faster compared with the best offset well.
  • Drilled 4,230 ft [1,289 m] in one day compared with an average 2,000 ft [607 m] per day experienced in the offset well.
    • Maximize drilling performance in deepwater salt section

      Shell was drilling in the Atwater Valley field of the deepwater Gulf of Mexico. The campaign’s next well, Deep Sleep, would involve salt drilling. A similar well in a comparable field achieved an ROP of 180 ft/h [55 m/h] over 14,025 ft [4,275 m] that served as the performance benchmark to exceed. Shell challenged Schlumberger to deliver an integrated drilling solution that would achieve faster ROP, maintain a high-quality wellbore, and set new best practices for salt drilling in the area.

      Implement engineered drilling approach to safely operate at high parameters

      Shell collaborated with Schlumberger experts in Houston to investigate salt drilling KPIs across the Gulf of Mexico and to evaluate the drilling systems and workflows used in previous successes in the region. The highest-performance runs were drilled with 50,000- to 60,000-lbf [222,411- to 266,893-N] weight on bit (WOB) and 170–180 rpm, whereas previous wells in the Atwater Valley field had been drilled with about 30,000-lbf [133,447-N] available WOB and 150–160 rpm. Shell and Schlumberger agreed that increasing available weight and rpm was the key to maximizing performance.

      A cross-discipline team of Schlumberger and Shell engineers investigated offset performances across the Gulf of Mexico to identify best practices and key BHA design features. With baseline performance determined, the IDEAS integrated dynamic design and analysis platform was used to model and simulate all combinations of bits and BHAs. The modeling and simulation included dynamic finite-element analysis to help the team determine the optimal drilling system in terms of performance, stability, and directional control.

      The results enabled the team to design a customized BHA that included a Smith Bits directional PDC bit (MDi716) for improved stability and enhanced torque response coupled with the PowerV vertical drilling RSS for automatic well path verticality.

      The team would run the BHA using a drill-on-torque approach, which involves operating at the topdrive torque limit. The topdrive had a torque limit of 50,000 ft.lbf, dictating a maximum rpm of 180, WOB of 60,000 lbf, and flow rate of 1,100 galUS/min [4.17 m3/min].

      To enable the most torque transfer to the bit, the makeup torque used to connect the 6 5/8-in drillpipe was increased and the reamer was removed from the BHA. Certain hole-cleaning measures were eliminated because Schlumberger modeling determined that hole-cleaning issues in the vertical section were improbable.

      Schlumberger also determined that surveys were necessary only at every fourth stand rather than at every stand. This decreased connection time from 20 minutes per stand experienced on offset wells to 14.3 minutes.

      Set worldwide ROP record for salt drilling, saved USD 1.1 million

      Before drilling began, Shell and Schlumberger held an onsite meeting to engage all stakeholders and reiterate the new mindset of drilling near the technical limit rather than in the middle of the safe zone. In addition, a drilling analyst was stationed at the rig to provide continuous monitoring and daily guidance during drilling to ensure high-quality hole conditions as well as maximized performance.

      The teamwork fostered on the Deep Sleep operation increased technical collaboration, improved service support, and superior results.Coupling this engagement with custom-engineered drilling technology and applied best practices, Shell drilled at an on-bottom ROP of 275 ft/h, a record for salt drilling. It also achieved an instantaneous ROP of between 350 and 390 ft/h—faster than any other performance in the area. Shell drilled 4,230 ft in a 24-hour period—more than twice the average footage drilled per day


      Download: Integrated Drilling Approach Saves Shell USD 1.1 Million, Achieves Record 275-ft/h ROP Salt Drilling Performance (0.52 MB PDF)

      Related services and products

       
       
      Request More Information
“[This job] sets the bar for future development—here and for our whole organization.”
John Cook
Drilling Superintendent
Shell

Integrated Drilling Approach Breaks Records in Deepwater Gulf of Mexio

Integrated Drilling Approach Saves Shell USD 1.1 Million, Achieves Record 275-ft/h ROP Salt Drilling Performance
PrevNextZoom1 of 1

Drill From Spud to TD While Keeping the Well Path Vertical

PowerV Vertical Drilling System
Vertical drilling system removes potential for costly correction runs and ensures smooth operations of casing and cementing. Visit PowerV Drilling System page