Schlumberger

Case Study: Bed Boundary Mapping Improves AGOCO Oil Recovery with
0% Water Cut

Expert petrotechnical interpretation enhances horizontal geosteering decisions to tap into attic oil, Libya

Challenge: Improve oil recovery by tapping into the top 6 ft [2 m] of the reservoir and delay water production while avoiding drilling suboptimal reservoir intervals.

Solution: Run the PeriScope bed boundary mapping service in the drillstring to effectively stay within optimal intervals.

Result:

  • Mapped and successfully drilled within intervals of lower water saturation and clay volume.
  • Increased net-to-gross quality compared with offset wells.
  • Produced attic oil and delayed water production to extend productive life of well.

Improved oil recovery solution sought in Libya

Horizontal drilling has substantially improved oil recovery rates in recent years, as incremental oil recovery and production rate can improve because of less water coning, larger drained area, and higher sweep efficiency. However, drilling horizontal wells to improve oil recovery can be difficult and has high associated risk in placing the well and steering within the best reservoir zone; sometimes, advanced technology methods are required. One such method is bed boundary detection and mapping using PeriScope service.

The Arabian Gulf Oil Company (AGOCO) was operating in the Messla field in Libya and wanted to enhance oil recovery in one of its wells in the region. The company logged a pilot hole and worked with Schlumberger to evaluate the resulting data as well as develop and deploy a solution that would improve recovery.

Optimal attic interval targeted

Schlumberger petrotechnical experts interpreted the pilot log and delineated the oil column, with results showing a production zone of interest located below a shaly sand layer, which should be avoided. Results also showed that the oil column was narrower than initially mapped. Working in collaboration with AGOCO, the team suggested drilling the top of the reservoir with the PeriScope service in the drillstring. PeriScope bed boundary mapping service enables seeing the reservoir top as the well is being drilled, which helps the drilling trajectory avoid the oil/water contact (OWC) and mitigates the risk of exiting the reservoir from the top. As a result, subsequent sidetracking is eliminated and production enhanced.

Petrophysical Comparison of Conventionally Drilled Offset Wells with PeriScope Service Well

 

Petrophysical
Parameter
Offset
Well 1
Offset
Well 2
PeriScope
Service Well
Net-to-gross 62% 74% 86%
Average water saturation 43% 41% 15%
Average clay volume 10% 15% 4.5%
Average production rate 2,327 bbl/d 2,144 bbl/d 2,385 bbl/d

 

Production improved with high petrophysical quality

Compared with two conventionally drilled offset wells, the well drilled using the PeriScope service produced reserves of higher petrophysical quality. Schlumberger petrophysical interpretation found decreased water saturation and clay volume, while net-to-gross ratio improved. The 2,385-bbl/d production rate of the PeriScope service well was much better than anticipated, and water cut was eliminated. Based on this operational success, the operator expressed interest in using the bed boundary mapping services on future wells to improve oil recovery.


Related services and products

 
 
Request More Information

Predict Reservoir Behavior
with Petrophysical Analysis

Interpretation Services for Petrophysics
Evaluate the properties that help determine hydrocarbon reserves and reservoir producibility, decide where to complete and how to stimulate, pinpoint where to drill next, and devise long-term strategies for successful field development. Visit Petrophysics Interpretation Services page

Interpretation Delineates Oil Column to Eliminate Water

Geological model showing the anhydrite layer that was detected above the trajectory and successfully avoided.
PrevNextZoom1 of 1
"After the great results from this operation, we are interested in using this technology in future wells to help us enhance production and oil recovery."
Ibrahim Elshafi
Senior Reservoir Geologist
AGOCO

Well Placement Service for Distance-to-Boundary Measurements

PeriScope bed boundary mapping service
PeriScope bed boundary mapping service provides drillers the ability to see the reservoir as wells are being drilled. Visit PeriScope Service page