Schlumberger

Case Study: Integrated BHA with StingBlade Bit Drills 24% Faster in Interbedded Formation and Saves 3.5 Days, Kuwait

Conical diamond element bit and Schlumberger mud motor complete 4,770-ft section in single run at double the ROP of offset bits

Challenge: Efficiently drill 16-in section in hard anhydrite and dolomitic limestone formations that are prone to stick/slip and decrease ROP.

Solution: Deploy a StingBlade conical diamond element bit and Schlumberger performance mud motor to drill the 16-in section in one run at faster ROP.

Result:

  • Completed the 4,770-ft [1,454-m] section in one run.
  • Achieved double the ROP in the Rus and Radhuma Formations.
  • Increased overall on-bottom ROP by 24% compared with the fastest offset well.
  • Saved 3.5 days of drilling time versus AFE.

Drill 16-in section through highly interbedded formation

An operator was drilling a development well in the Sabriyah field of northern Kuwait. The well plan included drilling the 16-in section from 1,230-ft [375-m] MD to 6,000-ft [1,829-m] MD, a total of 4,770 ft. The section would intersect carbonates interbedded with shale as well as the anyhydritic Rus Formation and dolomitic limestone Radhuma Formation, which are hard and typically generate stick/slip. Conventional TCI bits used to drill offset wells in the formations delivered insufficient ROP. The operator’s objective was to complete the entire section at a higher ROP than was achieved in offset wells.

Use StingBlade bit and Schlumberger mud motor to complete section

Smith Bits recommended an integrated drilling solution that included a high-performance mud motor and a six-blade StingBlade bit with 16-mm cutters. The mud motor would enable the high ROP required to decrease drilling time and reach TD faster than was possible using conventional technologies. The StingBlade bit was chosen because it leverages the superior impact and wear resistance of Stinger* conical diamond elements, which are strategically positioned across the StingBlade bit face. The elements feature a unique 3D geometry and thicker diamond table compared with conventional PDC cutters, enabling the StingBlade bit to deliver improved footage and ROP while minimizing shock in challenging drilling applications that can cause impact damage to conventional bits.

Engineers used the DBOS drillbit optimization system to better understand the characteristics and hardness of the formation to be drilled. To simulate the dynamic behavior of the bit and BHA design in the formation, Smith Bits used the i-DRILL integrated dynamic system analysis service. Using these softwares, the engineers were able to recommend the optimal BHA configuration and perform a detailed drilling parameter sensitivity analysis using matching field conditions and operating parameters. A drilling parameter road map was prepared to provide the operator a matrix of optimal drilling parameters to help mitigate stick/slip and other downhole vibrations.

Completed the section 3.5 days faster versus AFE

The integrated drilling solution helped the operator drill the entire 16-in section in one run. ROP in the Rus and Radhuma Formations doubled, and overall on-bottom ROP was 24% faster compared with conventional bits in offset wells. As a result, the operator saved 3.5 days of drilling time versus AFE.


Download: Integrated BHA with StingBlade Bit Drills 24% Faster in Interbedded Formation and Saves 3.5 Days, Kuwait (0.12 MB PDF)

Related services and products

 
 
 
 
Request More Information

Superior Impact Resistance in Interbedded Reservoir

Integrated BHA with StingBlade Bit Drills 24% Faster in Interbedded Formation and Saves 3.5 Days, Kuwait
PrevNextZoom1 of 1

Field-Proven Bits that Withstand Hard Formations

StingBlade
In field tests of more than 750 runs, StingBlade bits consistently delivered improved footage and ROP in challenging drilling applications that caused impact damage to PDC bits. Visit StingBlade Conical Diamond Element Bits page

Diamond Element Improves Drilling Speed and Stability

Stinger Cutter Element
Located at the bit’s center, the Stinger conical diamond element enables high-point loading to fracture rock more efficiently for increased durability and ROP.
Visit Stinger Conical Diamond Element page