Schlumberger

Case Study: ONGC Controls Water Encroachment with History-Matched Streamlines

ECLIPSE FrontSim simulator enables fast, 3D visualization of heterogeneous reservoir

Challenge:

  • Investigate irregular water cut, that affected almost 200 wells in large field
  • Improve future recovery planning and forecasting
  • History match 30 years of production data

Solution:

  • Undertake streamline analysis with the Petrel E&P software platform, and the ECLIPSE FrontSim streamline simulator
  • Generate 3D models of multiphase fluid flow along streamlines and perform history matching
  • Use allocation tables to better understand water injectors production contribution
  • Outline fluid flow behavior, and identify and correct culprit water injectors

Result:

  • Balanced production water cut levels
  • More accurate field performance review
  • Greater confidence in field recovery planning

Oil and Natural Gas Corporation Limited (ONGC) is an Indian multinational oil and gas company, headquartered in Dehradun, India. The company had identified production issues due to an irregular water cut that affected almost 200 wells in the large onshore field it operated. Some wells were producing with a lower than expected water cut, while a few had higher than expected water cut. To determine future recovery plans, ONGC needed to gain a better understanding of the cause of this issue.

After meeting with Schlumberger, it became clear that streamline analysis would provide the necessary insight into the water-cut differential. The field presented a number of issues for ONGC’s reservoir engineering team, including over 30 years of production history to deal with; highly heterogeneous geology; and data collection, quality, and validation concerns. It was decided that a combination of the Petrel E&P software platform and the ECLIPSE FrontSim streamline simulator would allow the team to generate streamlines and perform the required data analysis.

A Petrel workflow was developed to structure the entire process, from the generation of streamlines to the analysis of allocation tables. The ECLIPSE FrontSim simulator was used to generate 3D models of multiphase fluid flow along streamlines, enabling ONGC to identify the dominant flow paths and understand fluid flow behavior within the complex geology.

History matching reduced from two months to 15 days

History matching was then undertaken. Existing geocellular models were upscaled to ensure that the run time would be efficient and manageable. The results from the first few runs matched the oil rate, but the water cut varied significantly. The team used the allocation tables in the Petrel platform to better understand the varying extent to which different well water injectors contributed to and influenced production, and therefore whether water flow rate should be blocked or enhanced to enable a better match.

An iterative history matching method such as this typically takes a long time, especially to match water cut. However, the 3D visualization of streamlines made an otherwise rigorous task much faster, and allowed the team to complete the task in just 15 days. Without streamlines, history matching would have taken up to two months.

Improved insight

The advanced streamline simulation and history matching methods enabled ONGC reservoir engineers to identify the culprit injectors and, thus, control the water encroachment from those wells. The company now benefits from a more accurate performance review process for the entire reservoir, and greater confidence in related prediction and planning activities to maximize the field’s future oil recovery.


Download: ONGC Controls Water Encroachment with History-Matched Streamlines (0.88 MB PDF)

Related products on the Schlumberger software site

 
 
 
Request More Information

ONGC Accelerates Heterogeneous Reservoir Water Cut Analysis

History match resultsStreamlines from injectors to producers
PrevNextZoom1 of 2
"The streamlines generated by the ECLIPSE FrontSim simulator helped us history match the water from our wells effectively, and improve confidence in field recovery planning.”
Reservoir Manager
IRS, ONGC

Perform Fast, Accurate Simulation

ECLIPSE Industry Reference Reservoir Simulator
The ECLIPSE simulator enables fast and accurate prediction of dynamic behavior for all types of reservoir. Visit ECLIPSE Industry Reference Reservoir Simulator on the Schlumberger software site