Schlumberger

Technical Paper: Field Implementation of an Oil Based Carrier Fluid Improves Gravel Pack Efficiency

Society: SPE
Paper Number: 178947
Presentation Date: 2016
 Download: Field Implementation of an Oil Based Carrier Fluid Improves Gravel Pack Efficiency (1.91 MB PDF) Login | Register

 

Abstract

Open hole gravel packing of reservoir sections drilled with oil based fluid is traditionally performed with an aqueous carrier fluid. This typically involves displacing oil based fluid to aqueous fluid once the gravel pack screen is in place. In reservoirs with swelling or unstable shale, this approach reduces the risk associated with open hole exposure to aqueous fluid over time. However, experience has shown that instability can still occur, resulting in an incomplete or even an aborted gravel pack. In addition, mixing of incompatible oil and water based fluids downhole has the potential to generate very viscous emulsions that negatively impact gravel pack efficiency and well productivity. The objective of the new technology was to maintain borehole stability, eliminate fluid incompatibility and enable a complete gravel pack.

An oil based carrier fluid has been developed and qualified using laboratory and yard scale testing. The fluid is a solids free invert emulsion that exhibits near Newtonian rheological behavior; thereby promoting settling of proppant during gravel packing. The density of the fluid is controlled by adjusting the volume fraction and density of the brine phase. The fluid has been qualified up to a density of 1.25 SG with further potential to achieve a density of 1.63 SG.

The oil based carrier fluid has been introduced on a mature field, with a long history of gravel pack completions. Progressive reservoir depletion has created operational challenges, resulting in inconsistent gravel pack performance. Consequently, several procedural changes have been implemented over time. Reservoir inclination is typically up to 50°, open hole length up to 200 meters, and bottomhole static temperature around 90 degC. Gravel packs were most recently performed with a 1.10 SG aqueous carrier fluid.

The new carrier fluid has exhibited stable properties during implementation on multiple well completions. Gravel pack efficiencies have been consistently good, at 100% or higher. As a result, well productivity expectations have consistently been achieved or exceeded. The operational time for installing the lower completion compares well with the traditional approach with aqueous fluid.

The implementation of oil based gravel packs in multiple wells allows a comparison with brine based gravel packs in the same field. It is therefore considered to be an industry first.

Related services and products

 
 
 
 
Request More Information

Optimize Fluid Performance, Fracture Geometry, and Conductivity

Cased Hole Sand Control
Sand control options include gravel- and frac-packing and Alternate Path systems for both conventional single-and complex multizone completions, as well as screenless completions with chemical consolidation and proppant treatments. Visit Cased Hole Sand Control page