Schlumberger

WellWatcher Contact Multistage Stimulation Assurance System

Identify which clusters are taking proppant during multistage stimulation

The WellWatcher Contact system uses permanently installed multifiber cable on the casing to acquire DAS, DTS, and optional pressure data during multistage stimulation operations to confirm that the stages, clusters, and perforations are responding as expected. This real-time data enables operators to adjust the treatment as it is being run, reduce costs, and fine-tune planning for adjacent wells. The resulting understanding of the downhole response supports increasing production per well, optimizing drainage to reduce the overall well count, and identifying connectivity between fractures or stages.

Improve proppant placement assurance with DAS

The DAS acquisition server captures the sound of the proppant as it exits the perforations within each stage, enabling operators to determine if a perforation hasn’t opened, the proppant has bridged a perforation, or the proppant has stopped entering the perforation. The DAS data also confirms the landing and sealing of any balls pumped as part of a plug-and-perf operation and complements the temperature data measured by the DTS system, which effectively measures fluid movement to identify which zones and section of the wellbore have taken liquid as part of the stimulation.

Monitor reservoir changes and plug integrity using DTS

The DTS component monitors fluid exit to measure the resulting temperature change data. Using this data, the WellWatcher Contact system detects when a fracture has closed and pinpoints where a plug is leaking. After the stimulation is complete, the solar-powered DTS system can remain on the well for long-term production monitoring, wirelessly transmitting data to any location the operator specifies.

Access all data remotely

The WellWatcher Contact system transmits the data to cloud-based servers using its wellsite data transmission system and InterACT global connectivity, collaboration, and information service. All information is available for viewing and analysis with Schlumberger software. This integration seamlessly provides operators with information on the effectiveness of the fracture stage architecture, including which fractures are producing.

Related services and products

 
 
 
 
 
Request More Information

Diamondback Plugs Reduce Millout Time by Half

Diamondback plugs outperform competition in Woodford Shale
An operator in the Oklahoma Woodford Shale ran in and milled out 8 Diamondback composite drillable frac plugs more than twice as fast as competitor's 10 plugs. Read case study

BP Optimizes Drainage of More Than 100 Million Barrels of Secondary Oil

Thermal well model and flow distribution model
The permanent WellWatcher BriteBlue multimode DTS fiber installed outside the gravel-pack sand screens over the reservoir interval revealed flow rate changes in real time. Read case study