2-12 MUD CLEANER

High efficiency solids removal system

The M-I SWACO 2-12 MUD CLEANER is designed to remove 95 percent of the drilled solids to 74 microns and up to 50 percent to 40 microns. The 2-12 MUD CLEANER comprises one 1,000-gpm (3,785-Lpm) 2-12 D-SANDER mounted on one of our shakers.

The 2-12 D-SANDER includes two 12in. (305-mm) diameter polyurethane hydroclones that can be either vertically or slant mounted over the shaker. Each hydroclone bears four replaceable wear resistant polyurethane sections that are joined together with quick release stainless steel clamps. The D-SANDER is furnished with an 8in. (203-mm) diameter feed manifold and a 10in. (254-mm) diameter discharge manifold and a 0-60 psi (4.1-bar) pressure gauge. The D-SANDER also includes a solids discharge trough to distribute the hydroclone underflow evenly onto the screening surface.

The 2-12/Mud Cleaner advantage

Environmentally Efficient – The 2-12 MUD CLEANER removes and dries 95 percent of the drilled solids to 74 microns and up to 50 percent to 40 microns. Removing and drying drilled solids helps meet environmental regulations by minimizing waste generated and reducing disposal cost.

High Processing Rate – Processing capacity of 1,000 gpm with the 2-12- D-SANDER concentrates solids onto a classification shaker.

Configured to Customer Needs – The 2-12 D-SANDER can be mounted over the shaker either vertically or on a slant-mount frame.

Extends Equipment Life – The 2-12 MUD CLEANER helps minimize maintenance, repair and replacement of downstream equipment.

Reduces Operating Costs – The 2-12 MUD CLEANER reduces sand-size particles and saves liquid, thus reducing pump wear and mud cost, extending bit life, and improving rate of penetration.

Reduces Disposal Costs – The 2-12 MUD CLEANER minimizes waste generated thus reducing disposal cost.