Adjustable Union & Joint | SLB
Contact
Home Completions Well Completions Completion Accessories Adjustable Union and Joint

Adjustable Union & Joint

Achieve the desired length of production tubing without loss of pressure integrity

Contact Us
Related Documents

Facilitate tubing spaceout when completing your well

In most completions, the length of tubing available at surface is not enough for proper wellhead installation and operation. Pup joints and varying lengths of tubing are used to adjust the production string length as close as possible to the desired value. Then, the adjustable union or joint is installed, rotationally adjusted, and locked to the desired makeup length. In dual completions, the tool can be used to adjust the length of the short string.

Transmit torque, tension, and weight

The adjustable, telescoping action of the union or joint allows it to be set and locked at any desired position within its adjustment length while maintaining pressure integrity in the tubing string. Once the tool is in place, the desired amount of tension, weight, and rotational torque can be applied through it to the tubing.

Adjustable Union and Joint

Adjustable Union & Joint Offerings

AUT-1
Adjustable union
Space out tubing in single or dual completions.
Model A
Adjustable joint
Space out tubing in single or dual completions.
View All

Product Sheet Model C Expansion Joint

Compensate for tubing movement that occurs due to temperature and pressure changes.

Product Sheet Model D Expansion Joint

Compensate for tubing movement caused by temperature and pressure changes.

Product Sheet Type-A Swivel Slip Joint

Space out and connect tubing on the short string between dual packers.

Product Sheet AUT-1 Adjustable Union

Space out and connect the tubing on the short-string side between two dual packers.

Product Sheet Model A Adjustable Joint

Reliable means of spacing out and connecting the tubing between two dual packers.

Share This