BluePlug Max CMR
High-pressure wireline- or tubing-set cement retainer
Bidirectional barrier in cased hole wells for well abandonment or remedial cementing below the retainer.
BluePlug Max P
High-pressure permanent wireline- or tubing-set bridge plug
Reduce risks with validated designs
Based on field-proven designs, the BluePlug Max P bridge plug reduces risk of failure and premature setting with added features—such as antipreset slips—and ISO 14310 and API Specification 11D1 V3 validation. The compact, modular, cast iron construction reduces drillout times and enhances lifetime stability. In addition, the single-trip setting tool reduces time, risk, and cost. Versatile setting methods further simplify installation.
Plugs are available in quality grades Q1, Q2, and Q3.
Simplify your planning and optimize operations
The modular architecture of BluePlug Max P bridge plugs simplifies engineering designs across the entire range. You can select the plug best suited to your well environment while configuring certain components and subassemblies based on the specific challenges of your well. For example, you can customize the elastomer based on the chemical properties of your well fluids.
This standardization not only reduces lead times and costs, it enhances efficiency by enabling personnel to use a uniform deployment methodology. A kit is available for simple field conversion of the bridge plug into a BluePlug Max CMR high-pressure wireline- or tubing-set cement retainer.
Helpful links
About SLB