Product Sheet CONQOR 404 EH Phosphate-Base Corrosion Inhibitor
Prevent corrosion on metal surfaces.
M-I SWACO provides oxygen and sulfide scavengers in addition to corrosion control additives for various water-based drilling fluid systems. Surface as well as downhole corrosive gases can be treated to prevent failure of drilling tools and drillstring tubulars. Corrosion rates should be monitored throughout the drilling program with corrosion rings.
Corrosion Inhibitors Offerings
As with most wells, M-I SWACO uses corrosion coupons during this particular project to monitor the corrosion rate while drilling to ensure it remains under an acceptable limit (30 lb/ft2/yr), which was totally unacceptable.
An ammonium bisulfite solution used to remove entrained oxygen from drilling and completion fluids.
Prevent corrosion attack on casing, tubing, and downhole tools in contact with clear completion brines.