Secondary high-performance OBM emulsifier
Stabilize emulsions, leading to better emulsion stability, oil wetting of drill solids, and HPHT fluid loss reduction.
Fluid loss control additive
MEGADRIVE F fluid loss control additive is suitable for use in all paraffin-, mineral oil-, diesel-, or synthetic-based drilling fluid systems. It is a cost-effective supplemental fluid loss reducer and is temperature stable up to 350 degF [177 degC]. In new fluid systems, MEGADRIVE F additive is applied at concentrations ranging from 0.5 to 5 lbm/bbl [1.4 to 14.3 kg/m3], depending on the desired fluid loss control requirement, temperature, type of base oil, and other components of the system. Further treatments with the additive will enhance the filtration control properties of the drilling fluid system. Treatments on existing fluids should not exceed 1-lbm/bbl increments and should be thoroughly pilot tested prior to application.
MEGADRIVE F additive does not require special mixing equipment; it is easily added directly to the drilling fluid system through the mixing hopper and passes freely through shakers with minimal retention. Unlike solid filtration-control agents, MEGADRIVE F additive minimizes the volume lost over the shakers.
|Typical Physical Properties|
|Physical appearance||Dark liquid|
|Specific gravity||0.97 to 0.99|
|Pour point||<14 degF [<10 degC]|
|Flash point||>167 degF [>75 degC]|
Bioassay information is available on request. Handle in accordance with good industrial hygiene and safety practices. Avoid contact with skin and eyes. Do not breathe spray mist or vapors. Avoid spills and splashing during use. People susceptible to allergic reactions should not handle this product.
MEGADRIVE F additive is packaged in 55-galUS [208-L] drums in accordance with packaging guidelines. Keep containers tightly closed in a dry, cool, and well-ventilated place. Store away from heat and sources of ignition.