VERSATROL M1 Blended Asphaltic Resin | Schlumberger

VERSATROL M1

Blended asphaltic resin

VERSATROL M1 blended asphaltic resin reduces the HPHT fluid loss in all oil-based systems. It helps improve the overall emulsion stability and thermal stability characteristics of most oil-based formulations. VERSATROL M1 resin also increases viscosity, especially at lower temperatures.

VERSATROL M1 resin recommended concentrations range from 2 to 8 lb/bbl [5.7 to 22.8 kg/m³], with occasional daily additions in the range from 0.25 to 0.5 lb/bbl [0.71 to 1.43 kg/m³]. High-temperature situations and special applications may require higher concentrations, as much as 10 lb/bbl [28.5 kg/m³].

When used in the initial formulation, it is recommended to add VERSATROL M1 resin last. For existing systems, the product may be added at any time, mixed slowly during at least one complete circulation. Pilot testing is advised to determine the necessary treatment to achieve the desired results and to observe the change in mud properties.

Typical Physical Properties
Physical appearance Brown-black powder
Specific gravity 1.13–1.25
Flash point >590 degF [>310 degC]

Applications

  • Sealing low-pressure and depleted formations

Advantages

  • Reduces HPHT fluid loss in oil-based mud systems
  • Enhances emulsion and thermal stability

Limitations

  • Environmental restrictions concerning the use of oils and oil-based fluids should be considered since VERSATROL M1 resin is used in conjunction with oil
  • Temperature limitation of 325 degF [163 degC]

Toxicity and handling

Bioassay information is available upon request. Handle as an industrial chemical, wearing protective equipment and observing the precautions as described in the SDS.

Packaging and storage

VERSATROL M1 resin is generally packaged in 50-lb [22.7 kg] and 55.1-lb [25 kg], multiwall paper bags. Keep containers tightly closed in a dry, cool, and well-ventilated place.

View All

Share This