LOTORQ Torque- and Drag-Reducing Lubricant | Schlumberger

LOTORQ

Torque- and drag-reducing lubricant

Typical friction coefficient reductions of 35%–45% have been observed in field applications after the addition of 2% by volume of LOTORQ lubricant. The lubricant also shows low foaming, greasing, and emulsion-forming potential.

Advantages

  • Highly effective downhole lubricant for reducing torque and drag
  • Reduces the potential for and the severity of differential sticking
  • Compatible with low-solids, non-dispersed fluids and reservoir drill-in fluids
  • Low greasing and/or emulsion-forming potential
  • Non-foaming tendency

Applications

LOTORQ lubricant is designed for situations where torque, drag, and the potential for differential sticking are likely, such as when drilling highly deviated or high-differential-pressure wells. The additive is effective in water-based drilling and reservoir drill-in fluids, primarily in FLOPRO NT and FLOPRO SF systems.

Typical Physical Properties
Physical appearance Amber
Specific gravity 0.90–0.95 at 20 degC [68 degF]
Flash point >100 degC [>212 degF]

Normal concentrations of LOTORQ lubricant range from 1% to 3% by volume, or 3.5–10.5 lbm/bbl [10–30 kg/m3], depending on the fluid density, desired reduction in coefficient of friction, and the mud system being used.

After the initial treatment, periodic treatments should be made to maintain the desired concentration. Pills and special applications can require higher concentrations. Treatment levels and product usage depend on the rate of penetration, solids-control equipment, and dilution rates.

Pilot testing is recommended, especially in applications in excess of 300 degF [149 degC].

overflow image
In field applications, LOTORQ lubricant has reduced friction coefficients by 35%–45%in FLOPRO SF system drilling operations.

Toxicity and handling

Bioassay information is available upon request. Handle as an industrial chemical, wearing protective equipment and observing the precautions described in the safety data sheet (SDS).

Packaging and storage

LOTORQ lubricant is packaged in 52.8-galUS [200-L] drums or in bulk; other pack units on request. Store in a dry, well-ventilated area. Keep container closed. Keep away from heat, sparks, and flames. Store away from incompatibles. Follow safe warehousing practices regarding palletizing, banding, shrink-wrapping, and stacking.

View All

Share This