LUBE 1017OB Lubricant for Oil-Based Drilling Fluids | Schlumberger

LUBE 1017OB

Lubricant for oil-based drilling fluids

LUBE 1017OB lubricant is an oil-soluble additive specifically engineered for use in all invert-emulsion drilling fluids to decrease the coefficient of friction. Decreasing the coefficient of friction reduces torque, drag, and the potential of differential sticking in the wellbore.

LUBE 1017OB lubricant optimizes the performance of oil-based drilling fluids used on ERD wells or wells with complex trajectories that otherwise would be difficult to drill without exceeding the torque and drag limits of the rig. It also is recommended for slimhole applications to increase the effective weight on bit (WOB) and hence ROP.

Applications

LUBE 1017OB lubricant should be added at 1% to 3% concentration by volume depending on the severity of the problem. Care should be taken when adding LUBE 1017OB lubricant to invert-emulsion systems with high solids as viscosity can increase. Pilot testing is strongly recommended to determine any effects on the system's rheological properties for all initial applications and subsequent treatments.

LUBE 1017OB lubricant should be added slowly and directly to the mud system, maintaining a small constant stream wherever there is good agitation or through the mixing hopper.

Typical Physical Properties
Physical appearance Amber liquid
Odor Characteristic
Solubility in water Partly soluble in water
Specific gravity 0.98 g/cm3 at 68 degF [20 degC]
Flash point >212 degF [100 degC]

Limitations

  • Can increase viscosity in high-solids invert-emulsion fluids
  • For invert emulsion use only

Toxicity and handling

Information is available upon request. Handle as an industrial chemical, wearing protective equipment and observing the precautions described in the safety data sheet (SDS).

Packaging and Storage

LUBE 1017OB lubricant is available in 55-galUS [208-L] drums. Store away from sources of heat or ignition. Keep container closed. Follow safe warehousing practices regarding palletizing, banding, shrinkwrapping, and stacking.

View All

Share This