High-performance brine-compatible drilling fluids
Maintain efficient well control in the Bakken.
The EnduraSurf additive is designed for the EnduraDril fluid for unconventional drilling prospects in onshore operations.
For ROP enhancement, 1 to 3 vol% of EnduraSurf additive should be added directly to the mud system at or near the pump suction over one circulation period. Ideally, the initial treatment should be made prior to drilling out the casing shoe or before entering the open hole while the bit and BHA are clean. If required after initial treatment, the product may be continually added or injected into the mud stream at the pump suction while drilling. The injection rate will vary according to hole size, pump rate, dilution rates, formation type, and ROP.
|Typical Physical Properties
||0.78 to 0.85
|Solubility in water
||201 degF [94 degC]
Highly compatible with produced brine fluids, including Bakken produced brine.