M-I SWACO Drilling Waste Management | Schlumberger
Contact
Home Drilling Drilling Fluids and Well Cementing Solids Control Drilling Waste Management

Drilling Waste Management

Safely and efficiently manage drill cuttings

Download Catalog
Contact Us
Related Documents
Employee climbing up drilling waste management equipment.

Formation drilled cuttings can be handled by various methods, depending largely on environmental requirements, geographic location, and geological conditions. Cuttings must be transported and prepared prior to final disposition, which may include reinjection into subsurface formations.

Optimal drilling waste management demands high performance in surface and subsurface engineering analysis and unparalleled diagnostic expertise—before, during, and after the operation.

Drilling Waste Management Offerings

VERTI-G
Cuttings dryer
Maximizes liquid-solid separation in large-volume processing.
iWISE
Integrated waste injection services
Meet or exceed stringent environmental standards in remote and environmentally sensitive locations.
CLEANCUT
Cuttings collection and transportation system
Comply with environmental regulations by safely and efficiently collecting and containing drill cuttings.
View All

Product Sheet DURAFLO Composite Replacement Screens

Promote longer screen life.

Tech Report On-Rig Treatment of Cuttings for Discharge Recovers USD 340,000 Fluid for Reuse

2,968 tonUK of oil-based cuttings treated on the rig and discharged at <0.1% TPH

Product Sheet CCB CLEANCUT System Cuttings Blower

Prime cuttings mover of the CLEANCUT cuttings collection and transportation system.

Case Study Significant Reduction of Ultrafines in Synthetic-Based Mud Leads to Successful Mud Recovery

Offline mud treatment using RHE-USE centrifuge system overcomes contaminated mud challenge, saves more than USD 90,000 in dilution, Argentina.

Case Study Oklahoma Operator Cuts Drilling Waste by Two-Thirds Using SCREEN PULSE Separator

Fluid and cuttings separator recovers 51.3 bbl of oil-base mud, saves USD 6,000, and reduces drilling waste by 16,547 lbm.

Case Study SCREEN PULSE Separator and VERTI-G Dryer Reduce Mud Losses and Waste Volume to Save USD 36,910

Solids control system reduces fluid retention on drilling cuttings and increases fluid recovery on shakers during onshore operation in Argentina.

Share This