D700 HT GASBLOK Gas Migration Control Additive for High Temperatures | Schlumberger
Contact
Home Drilling Drilling Fluids and Well Cementing Well Cementing Gas Migration Control D700 HT GASBLOK Gas Migration Control

D700 HT GASBLOK

Gas migration control additive

Download PDF
Contact an Expert
Related Documents

Gas migration control additive for high temperatures

D700 HT GASBLOK gas migration control additive is an aqueous dispersion of latex particles with surfactants. It creates an impermeable barrier that prevents annular gas migration into the cement slurry during the critical hydration period. When formation gas enters the slurry, the latex particles coalesce to form a low-permeability plastic film that blocks further migration into the cement.

Temperature range: 250 to 350 degF [121 to 177 degC]
Slurry density range: 8 to 23 ppg [960 to 2,760 kg/m3]
D700 HT GASBLOK additive prevents gas migration during high-temperature primary and remedial cementing.
D700 HT GASBLOK additive prevents gas migration during high-temperature primary and remedial cementing.

CemCRETE

Concrete-based oilwell cementing technology

Develop high-quality cementing solutions for each type of well environment.

D600G GASBLOK

Gas migration control additive

Create an impermeable barrier with surfactants for temperatures ranging from 150 to 300 degF [66 to 149 degC].

D500 LT GASBLOK

Gas migration control additive

Block gas flow at temperatures ranging from 32 to 160 degF [0 to 71 degC].

D193

Fluid loss and gas migration control additive

Control fluid loss and gas migration at temperatures ranging from 32 to 200 degF [0 to 93 degC].

D400 EasyBLOK

Solid gas migration control cement system

Eliminate operational limitations, reduce costs, and simplify handling logistics for temperatures from 68 to 230 degF [20 to 110 degC].
View All

Product Sheet D700 HT GASBLOK Gas Migration Control Additive

Control severe annular gas migration during high-temperature primary and remedial cementing.

Share This