Effluent Handling and Disposal | Schlumberger
Contact
Home Reservoir Characterization Reservoir Testing Surface Testing Effluent Handling and Disposal

Effluent Handling and Disposal

Efficient and safer treatment alternatives

Contact an Expert
Related Documents

Accurate, efficient measurements for understanding your production

When handling and disposing of effluents during tests or routine operations at permanent production facilities are not feasible, surface testing equipment is a solution.

Our wide variety of proven effluent treatment, handling, and disposal options means you’ll maintain regulatory compliance while cost-effectively reducing the impact of testing operations.

Operator working on ClearPhase separator

Effluent Handling and Disposal Offerings

Atmospheric Gauge Tank
Nonpressurized vessel for measuring low flow rates
Measure low flow rates and calibrate separator oil line meters.
U-Boom
Manage the flare distance from the rig
Reduce heat radiation and fire risk with precision positioning of boom and burner.
Transfer Pump
Transfer oil from tank to burner or available flowline
Pump oil from a tank to a burner or from a tank into an existing flowline.
Oil and Gas Manifolds
Divert hydrocarbons without flow interruption
Divert oil or gas, without flow interruption, from the separator to burners for disposal, to a tank for measurements or storage, or to a production line.
Steam-Heat Exchanger
Heat your well effluent without fire risk
Prevent hydrate formation, reduce viscosity, and break down emulsions.
V-Boom
Heavy-duty triangular boom for the North Sea
Reduce heat radiation and fire risk for North Sea flaring operations.
Vertical Surge Tank
Liquid hydrocarbon storage
Measure and store liquid hydrocarbons after separation.
ClearPhase
Mobile testing discharge treatment
Save time and money with an efficient, cost-effective alternative to water storage, transport, and onshore disposal.
CleanPhase
Well test separator
Unobtrusively monitor liquid levels and adjust the height of the weir to achieve true three-phase separation.
EverGreen
Minimal environmental impact well effluent burner
Achieve well test and environmental objectives with a single-head, 12- or 1-nozzle effluent burner.
View All

Case Study OMV Achieves Record Horizontal Appraisal Well Through Collaborative Well Engineering and Operation

Integrated drilling, characterization, and well testing solution enables meeting key objectives in complex ERD appraisal well with no HSE issues, Barents Sea.

Product Sheet Vertical Surge Tank

H2S service vessel that stores liquid hydrocarbons after separation.

Case Study EverGreen Burner Minimizes Environmental Impact in Heavy Oil Development

High-performance effluent burner produces no fallout or smoke in Saudi well test.

Product Sheet CleanPhase Well Test Separator

Save cleanup time, improve safety, and minimize environmental risk.

Product Sheet Dual-Pot Sand Filter

Remove sand and other solids from well effluent.

Product Sheet Atmospheric Gauge Tank

Nonpressurized vessel for measuring low flow rates, calibrating metering devices, and temporary storage.

Share This