Quality Data Acquired in North Sea Wells with Temperatures Exceeding 160 degC | Schlumberger
Case Study
Location
North Sea, Offshore
Details

Challenge: Reduce risk and cost of acquiring formation evaluation data in high-temperature Kristin wells

Solution: Run EcoScope HT multifunction LWD service

Results:

  • Acquired LWD data in about 6 h less time per run than traditional LWD triple combo, despite circulating temperatures above 160 degC [320 degF]
  • Saved more than 1 h per run by minimizing rathole requirements
  • Improved measurement quality
  • Spent more than 450 h in severe conditions with no temperature-related failure
Products Used

Quality Data Acquired in North Sea Wells with Temperatures Exceeding 160 degC

Statoil improves measurement quality and saves approximately 6 h per run

The EcoScope HT LWD service saved Statoil about 6 h per run—compared with a traditional LWD triple combo—in the high-pressure, high-temperature (HPHT) 8 1/2-in reservoir sections of wells in the North Sea’s Kristin field. Statoil also saved more than 1 h of drilling time per run because the simpler EcoScope HT BHA minimized rathole requirements by making measurements closer to the bit.

The EcoScope HT service, rated to 175 degC [350 degF] maximum operating temperature, spent more than 450 h in severe downhole conditions—maximum circulating temperatures above 160 degC [320 degF]—with no temperature-related failure. Standard LWD systems rated to 150 degC [300 degF] had proved unreliable in these HPHT conditions, resulting in incomplete data acquisition and extra trips to change out LWD tools.

overflow image
The EcoScope HT service simplifies BHAs by integrating a full suite of formation evaluation, well placement, and drilling optimization measurements into a single collar.
Products Used

Share This