ResPack Swellable Bonded-to-Pipe Packers Withstand Differential Pressures of More Than 7,500 psi [52 MPa] | SLB
Contact
Home Resource Library ResPack Swellable Bonded-to-Pipe Packers Withstand Differential Pressures of More Than 7,500 psi [52 MPa]
Tech Report
Download PDF
Share
Contact Us
Location
Bakken Formation, United States, North America, Onshore
Details

North Dakota Bakken Shale

Application
Multistage stimulation
 
Well type
Horizontal, openhole
 
Natural resource
Oil
 
Max. wellbore lengths
9,500 ft [2,896 m]
 
Max. stage count
40

Products Used
ResPack Packer
Unconventional Resources

ResPack Swellable Bonded-to-Pipe Packers Withstand Differential Pressures of More Than 7,500 psi [52 MPa]

Operator executes operations flawlessly in three gas wells and awards Schlumberger additional projects in Bakken Shale

 
overflow image
The proprietary design of ResPack swellable bonded-to-pipe packers enables shorter elements to withstand significantly higher differential pressures, approximately three times those of conventional packers. The shorter lengths also make the packers easier and less costly to install. The water swellable bonded-to-pipe packer is rated to 10,000 psi [68.95 MPa], the highest psi/ft rating in the industry, and to 270 degF [132 degC].
Products Used
ResPack
Swellable bonded-to-pipe packer

Optimize multistage fracturing and ICD or sand screen completions with elements that seal the annulus even in high-pressure conditions.
Unconventionals
Knowledge for increased efficiency

Optimize well landing, fracturing, and production to maximize recovery at less time and cost per barrel.

Share This