DPI Digital Slickline Production Logging Interface | SLB

DPI

Digital slickline production logging interface

Real-time control of sensor acquisition and tool status

The digital slickline production logging interface provides you the ability to control acquisition of the downhole production logging tools. It also provides real-time control of the depth correlation performed on site. You can control all stations and depth passes performed on site to know if depth is correct and data are properly recorded. When logging program is accomplished, you can perform a quick overview on site, even prior to pulling out of hole.

The digital PSP interface can be run with a standard PS Platform platform logging string, including two basic measurement sonde devices (PBMS-A and PBMS-B), gradiomanometer specific gravity profile tool (PGMS-B), and PS Platform platform inline spinner (PILS-A) and flow-caliper imaging sonde (PFCS-A).

Specifications  
Specifications Temperature rating   302 degF [150 degC]
Specifications Pressure rating   15,000 psi [103.4 mpa]
Specifications Length (makeup)   15-in [381 mm]
Specifications Length (transport, with end caps)   20.4-in [517 mm]
Specifications Outside diameter   1 11/16-in [43 mm]
Specifications Weight   6.83 lbm [3.1 kg]
Specifications Service   H2S service
Specifications Top thread   1 33/64-in 12 stub ACME (BEST) female
Specifications Bottom thread   1 9/16-in 12 stub ACME special

DPI Digital Slickline Production Logging Interface
DPI provides operator real-time control of PSP logging data, acquired on depth.
View All

Share This