Product Sheet POLYPAC ELV Extralow-Viscosity Polyanionic Cellulose Additive
Controls fluid loss while providing supplemental shale inhibition.
Filtration Reducers
Reduce fluid filtration of water- or nonaqueous-based drilling fluids
M-I SWACO offers a complete line of chemicals used to reduce drilling fluid filtration and improve filtercake quality while drilling permeable formations.
Nonaqueous Polymeric Fluids
-
ECOTROL F
Filtration-control additiveProvides tight HPHT fluid loss control at a low product concentration. View
-
ECOTROL HT
High-temperature filtration-control additiveHPHT fluid loss control in environments up to 500 degF [260 degC]. View
-
ECOTROL RD
Filtration-control additiveReduces HPHT fluid loss at temperatures up to 375 degF [191 degC]. View
-
MEGADRIVE F
Fluid loss control additiveSuitable for use in all paraffin-, mineral oil-, or synthetic-based drilling fluid systems. View
-
NOVATEC F
Filtration-control additiveImparts rapid reduction in HPHT filtration when used at relatively low concentration levels. View
-
ONE-TROL HT
High-temperature filtration control agentEffective alternative to asphalt and gilsonite where their use is undesirable. View
Nonaqueous Particulate Fluids
-
VERSATROL
Asphaltic resinSeal low-pressure and depleted formations. View
-
VERSATROL HT
High-temperature asphaltic resinFiltration control at ultrahigh temperatures. View
-
VERSATROL M
Asphaltic resinLow softening point for filtration control over large temperature range. View
-
VERSATROL M1
Blended asphaltic resinReduces HPHT fluid loss in all oil-based systems. View
Water-Based Modified Natural Polymer Fluids
-
POLYPAC ELV
Extralow-viscosity polyanionic cellulose additivePrimarily used in weighted systems to avoid uncontrollable viscosity buildup. View
-
POLYPAC UL
Ultralow-viscosity polyanionic celluloseControls fluid loss with minimal increase in viscosity in water-based muds. View
-
POLYPAC R
Polyanionic-cellulose filtration-control additiveControls fluid loss in freshwater, seawater, potassium chloride, and salt muds. View
-
M-I PAC R
Technical-grade polyanionic-cellulose filtration-control additiveControls filtration and increases rheology, especially effective in saltwater brines. View
-
M-I PAC UL
Ultralow-viscosity polyanionic-cellulose filtration-control additiveControl filtration with minimal increase in rheology and at all pH ranges. View
Helpful links
About SLB