Zero-leakage grease-filled bearings revolutionize deepwater MPD reliabilty

minus
美国, North America, 海上

The SLB advanced grease-filled, dual-polyurethane sealing bearing assemblies eliminated leakage events in deepwater MPD operations, reducing the leakage event rate from 31.8% to 0%. This innovation extended bearing rotating life to 120 hours and one million revolutions, saving the client an average of USD 13.3 million in operational costs over nine months. Maintenance time was cut by 60%, and overall maintenance costs were reduced by 40%, significantly improving asset availability and operational confidence.

Deepwater MPD projects were plagued by frequent bearing failures and leakage events in rotating control device (RCD) bearing assemblies. The legacy system, which used oil-filled bearings with dual natural rubber sealing elements, averaged only 56.3 rotating hours (337,000 revolutions) per run and suffered a high leakage event rate of 31.8%. Each leakage event resulted in 8–20 hours of NPT for RCD replacement. At an estimated NPT cost of USD 1.9 million per day (approximately USD 79,000 per hour), each event resulted in losses of USD 632,000 to USD 1.58 million. These recurring failures undermined operational confidence and increased costs, while previous attempts at incremental improvements yielded minimal results and failed to deliver consistent, quantifiable savings.

The customer’s primary objective was to eliminate leakage events, extend bearing life, and reduce both direct maintenance costs and costly NPT. They sought a robust, field-proven solution that would restore confidence in the MPD system, improve operational efficiency, and establish a new standard for reliability in challenging deepwater environments.

SLB responded by launching a comprehensive redesign of the RCD bearing assembly, focusing on both sealing integrity and lubrication strategy. The first step involved reengineering the internal sealing system—improving seal carrier geometry and material performance, and introducing dual polyurethane (poly) sealing elements. This new configuration minimized deformation and leakage pathways under dynamic pressure loading, directly addressing the root cause of previous failures.

A breakthrough was achieved by replacing the oil-based lubricant with a specially selected grease, chosen in collaboration with a lubrication specialist for its superior viscosity and rheological properties. The grease provided a robust barrier against mud ingress and maintained stable lubrication under high-pressure, high-rpm conditions. Field trials demonstrated that grease-filled, dual-poly bearings could operate at higher rpms without sacrificing run life, expanding the operational envelope to 120 rotating hours and one million revolutions—more than double the previous baseline.

The impact was immediate and dramatic: the leakage event rate dropped from 31.8% to 0%, and no bearing assembly-related failures were recorded in the grease-filled population. Average rotating hours increased from 56.3 to 98.8, and average revolutions rose from 337,000 to 746,000. The transition from full bearing rebuilds to an internal seal cartridge replacement model further reduced maintenance time from 80 to 32 work-hours per event, cut maintenance costs by 40%, and improved asset turnaround and availability. Over the last nine months, these innovations saved the client an estimated USD 13.3 million in operational costs and set a new benchmark for deepwater MPD reliability.

相关产品