Valve Brands

Deploy a quality, durable, cost-effective valve designed to ASME and API specifications. View

Switch between trim styles in a single choke. View

Low noise and vibration levels. View

Achieve total vertical access for insert retrieval. View

Reduce erosion problems while ensuring positive flow control. View

Control wellbore pressure and circulate out gas kicks while drilling. View

Handle standard, erosive, and corrosive applications. View

Retrieve the trim, actuator, and retention mechanism to surface. View

Achieve positive closure and absolute control of downhole pressure. View

Precisely control flow with a globally proven technology. View

Multiple-pressure drop, anticavitation valve ideally suited for water injection. View

Mount to a subsea structure or incorporate into retrievable FCM or choke bridge. View

Redefine achievable accuracy with nonintrusive line-of-sight ultrasonic flowmetering. View

For ultrahigh-flow MEG and methanol requirements of large gas projects. View

Inject low-dose inhibitors effectively. View

Mitigate hydrate formation with methanol or regenerated MEG. View

Adapt the choke valve to the operating environment and increase uptime. View

Reduce erosion problems and ensure positive flow. View

Lower emissions while improving uptime and profitability. View

Durable, lightweight, and ideal for a wide range of applications where space is at a premium. View

Premier gate valves providing reliable performance and extended service life in abrasive drilling applications. View

Optimize operations in corrosive CO2 injection and waterflood applications. View

Large-bore design for compressor and pumping stations. View

Small-bore valve designed for use in piping systems. View

Achieve positive sealing without relying on line or hydraulic pressure. View

This double block-and-bleed (DBB) plug valve provides a bubble-tight verifiable dual seal without seal abrasion. View

Maximize long-term sealing performance and minimize product contamination. View

Through-conduit gate valve with a cast body, fully compliant with API Spec 6D. View

1 1/2- to 4-in sizes, ANSI 150 to 1500. View

6- to 60-in sizes, ANSI 150 to 1500. View

1 1/2- to 20-in sizes, ANSI 2500. View

2- to 60-in sizes, ANSI 150 to 2500. View

1/2- to 12-in sizes, ANSI 150 to 1500. View

1 1/2- to 60-in sizes, ANSI 150 to 2500. View

Overcome ball flexing to 10,000 psi. View

Save valuable space with one of the smallest compact actuators on the market. View

Ensure reliable valve shutdown when an external powersource is unavailable. View

Achieve on-off control of ball or plug valves. View

Enhance flexibility with consistent engineering and efficient modularity. View

Achieve on-off modulating control of multiple valve types. View

Reliably perform with compressed air, natural gas, or nitrogen actuator supply. View

Choose from double-acting or spring-return designs for shallow or deep water. View

Economical ball valves for general-purpose applications, featuring a wide range of styles and end connections. View

Full- and reduced-port designs, ASME 150 to 2500. View

Internal cavity relief while maintaining bidirectional sealing capability. View

Ideal when zero leakage and frequent operation are required. View

Withstand the external pressure caused by the column of seawater at operating depths. View

Save repair time and money with top-entry, infield- repairable designs. View

Resist corrosion and high impact and achieve bubble-tight sealing. View

Robust design, sealing areas, and stainless steel overlays. View

Nonslam, reliable operation that stands up to excessive wear. View

Field-proven backflow prevention. View

Proven performance in a wide range of oilfield, chemical, petrochemical, and hydrocarbon processing applications. View

The Cameron WKM Model 310F floating ball valve satisfies a wide range of applications. View

Internal cavity relief while maintaining bidirectional sealing capability. View

Variety of ANSI and API Spec 6D designs. View

Two-piece threaded end valve, fire tested and certified to API Spec 607. View

Enhanced safety and seal reliability. View

Simple yet rugged and reliable through-conduit valve. View

Withstand temperatures up to 650 degF [343 degC]. View

Sealing performance of a ball or gate valve but in a much smaller profile. View

20 different frame and spur combinations. View

Suitable for any application that requires valve operation. View

Commercial-grade, worm-geared, and made for multiple output turns. View

Meet AWWA Spec C504. View

Aluminum standard housing material. View

For when valves or dampers must be opened/closed to same position. View

Meet marine, submerged, and high- and low-temperature requirements. View

300 series stainless steel unit housings, covers, indicators, and more. View