TCF-JD

Designed for maximum flexibility

The jar down-actuated trigger charge firing head TCF-JD is designed to offer maximum flexibility and control over the firing operation because the firing head is run separately from the gun string. The downhole fill sub assembly and receptor booster are run with the gun string. After the gun string is positioned at shooting depth, the trigger charge firing head is run on a slickline string with weights and a jar.

The assembly is gently latched onto the downhole receptor booster cover inside the fill sub. Jarring down against the booster cover shears the shear pins, which releases the firing pin (propelled by hydrostatic pressure) onto the detonator and fires the guns.

Jarring up unlatches the firing head from the booster cover after firing, and the firing head and slickline tools can be pulled out.

In case of a problem, the firing head is unlatched and returned to the surface for examination. Then, a decision is made to rerun another firing head or to run an impression block. If the firing head cannot be latched, bailers may be run. If necessary, the unarmed gun string may be pulled safely to the surface.

Safety and protected tubulars

A minimum of 150-psi hydrostatic pressure is required to fire the percussion detonator, thus preventing firing at the surface.

In the unlikely event that the jar down mechanism is accidentally actuated while spudding against debris, the shaped-charge jet develops along the axis of the tubing and cannot damage the string. The well fluid also dampens the shaped-charge jet before it reaches the bottom of the firing head housing.

A special firing pin is available for dry hole operations. In these operations, the firing pin is driven into the detonator by the jar down impact. With this mode of operation, additional precautions must be taken because the main surface safety feature (150-psi minimum hydrostatic pressure) is disabled.