Managed pressure drilling (MPD) services and equipment
SLB MPD services and equipment control bottomhole pressure to drill narrow-margin wells reliably.
Narrow drilling margins increase risk
When the window between pore pressure and fracture pressure is tight, a mud weight heavy enough to control the well can also break down the formation. Every density change takes circulation time, and every connection or pump stop shifts bottomhole pressure again. The result is ballooning, lost circulation, stuck pipe, and additional casing strings that increase nonproductive time, raise well construction costs, and complicate access to target formations.
- MPD engineering and consulting—Well analysis sets pore, fracture, and wellbore stability limits, then defines MPD design, procedures, and contingencies for each well.
- Rig integration and commissioning—SLB prepares the rig to accept MPD equipment, then installs and commissions it for a single well or as a lasting rig upgrade.
- Automated pressure control—Automatic, semiautomatic, and manual control modes match the level of automation to the hydraulic window and the rig.
- Integrated deepwater MPD—Riser equipment, rotating control, and surface controls support MPD, pressurized mudcap drilling, and riser gas handling from floating rigs.
- Field execution and training—Dedicated MPD engineers execute the plan with the rig contractor and train personnel offshore and on land.
MPD field results show fewer rig days, fewer casing strings, and longer runs
58% less rig time in a Gulf of Mexico production section
10 rig days avoided offshore Venezuela
In a fractured carbonate with a 48-kg/m3 [0.4-lbm/galUS] operating window, automated MPD held bottomhole pressure while drilling, tripping, and running liner. The operator drilled more than 700 m [2,300 ft] of open reservoir and avoided rig time valued at more than USD 20 million (2017).
1,616-m interval drilled in one run offshore Guyana
Bakken lateral rig days reduced from 14 to 8.8
Petro-Hunt used MPD services with a rotating control device, drilling chokes, and a flowmeter to drill Bakken laterals with lighter drilling fluid, reducing average rig operating days from 14 to 8.8 across five wells (SPE/IADC International Drilling Conference, 2019).
Explore MPD technologies
Frequently asked questions about MPD
How do SLB MPD services control bottomhole pressure?
SLB MPD services combine drilling fluid density with adjustable surface backpressure to maintain bottomhole pressure within the planned drilling window. The @balance Control MPD system uses real-time hydraulics modeling, sensors, and automated choke control to respond to changing pressures and flow rates. This enables more precise pressure management during drilling, connections, and other critical operations.
How does SLB determine when managed pressure drilling is needed?
SLB MPD engineers evaluate pore pressure, fracture pressure, and wellbore stability limits to determine whether conventional drilling methods can maintain the required pressure window. For wells with narrow drilling margins, lost circulation, or instability risks, SLB develops a well-specific MPD plan through its MPD project management and consulting services, covering pressure limits, equipment selection, control procedures, contingency planning, and rig integration.
What SLB rotating control devices are available for different rig types?
SLB provides rotating control devices (RCDs) for land rigs, jackups, platforms, drillships, and semisubmersibles. The compact above-tension-ring (ATR) RCD supports land and selected offshore applications, while the below-tension-ring (BTR) RCD is designed for floating rigs. The RCD 3™ system provides an additional option for land operations. SLB engineers select equipment based on rig configuration, operating pressure, and well requirements.
Can SLB integrate managed pressure drilling on drillships and semisubmersibles?
Yes. SLB integrated deepwater MPD services combine the deepwater integrated MPD riser joint, BTR RCD, riser gas handling equipment, and @balance Control systems. This integrated approach supports managed pressure drilling, pressurized mudcap drilling, and riser gas handling. SLB provides engineering, installation, commissioning, and operational support for deepwater drilling campaigns.
What results have operators achieved using SLB managed pressure drilling services?
SLB MPD deployments have demonstrated measurable improvements in drilling efficiency and well construction costs. In the Gulf of Mexico, integrated deepwater MPD reduced rig time by 58%, eliminated a liner, and saved approximately USD 6 million in well construction costs. In the Bakken, MPD reduced average rig operating days from 14 to 8.8 across five wells. Results depend on well conditions and drilling objectives.
Drill your narrowest-margin wells
SLB designs and manufactures its MPD equipment and runs the program with your rig team, from well analysis and rig integration to execution and training, on land, offshore, and in deep water.
Talk to an MPD optimization expert