ACTive DFLO

CT real-time flow measurement tool

CT brand art
minus

Real-time downhole flow measurement for CT

The ACTive DFLO™ CT real-time flow measurement tool provides real-time fluid velocity measurement and flow direction detection during CT interventions.

As part of the ACTive™ downhole flow measurement service, it transmits downhole measurements to surface through fiber-optic telemetry while maintaining pump-through capability. Real-time flow data provides immediate insight into fluid movement and reservoir response, helping operators evaluate treatment effectiveness and make informed adjustments to pumping rates, injection depth, and fluid volumes. The tool can also profile producing or injecting intervals to support fluid placement, treatment planning, and pretreatment and posttreatment evaluation.

  • Fluid injection profiling
  • Production and injection profiling
  • Fluid placement control
  • Leak detection
  • Treatment effectiveness monitoring
  • Diversion confirmation
  • Pretreatment and posttreatment flow profiling
  • Improve fluid placement using real-time downhole flow monitoring data
  • Evaluate treatment effectiveness and adjust intervention parameters without delay
  • Increase confidence in pumping rate, injection depth, and fluid volume decisions
  • Confirm fluid direction and treatment diversion while the intervention is in progress
  • Reduce operational time by combining flow measurement with other CT services in the same run
  • Improve treatment understanding by integrating flow measurements with additional downhole and distributed measurements
  • Support treatment selection with production or injection profiles acquired before or after an intervention
  • Real-time fluid direction detection and flow velocity measurement
  • Pump-through design for continuous fluid delivery
  • Fiber-optic telemetry for real-time data transmission to surface
  • Robust design without centralizers, arms, spinners, or protruding measurement elements
  • Modular configuration for different intervention requirements
  • Compatibility with ACTive services
  • Integral CCL for accurate depth control
  • Optional gamma ray, pressure, and temperature measurements
  • Compatibility with DTS
  • Flow-through and ball-drop capability
  • Resistance to hydrogen sulfide, solvents, and acid

Measure flow at the point of intervention

The ACTive DFLO tool measures downhole fluid velocity and identifies flow direction during the CT operation. Its pump-through design enables treatment fluids to pass through the tool while measurements are acquired.

Transmit measurements to surface in real time

Fiber-optic telemetry conveys the downhole measurements to surface. This real-time connection gives the intervention team immediate visibility into fluid movement and the reservoir response to treatment.

Combine flow data with other downhole measurements

Flow measurements can be combined with pressure, temperature, gamma ray, CCL, tension and compression, or DTS data. Integrating these measurements improves understanding of treatment progress and downhole conditions.

Adjust the intervention as conditions change

The intervention team can use the real-time data to refine pumping rates, injection depth, and fluid volumes. The tool can also profile flow across producing or injecting intervals to support treatment planning and posttreatment evaluation.

Chart showing comparison of pre- and poststimulation injection profiling.
Comparison of prestimulation and poststimulation injection profiling along the openhole horizontal section. The acid stimulation targeted the middle section and resulted in a more uniform water injection distribution along the open hole. Surface injection pressure was reduced from 1,000 to 0 psi.