Pressure Control Equipment | Subsea | SLB

Subsea

Complete systems to maximize safety and efficiency

Cameron Drilling service photo with subsea BOP stack

BOP controls, annular and ram-type BOPs, pipe and shear rams—ideal for drillships or semisubmersible rigs operating around the world.

Cameron Drilling service photo with subsea BOP stack

Annular BOPs

Choose from a variety of field-proven designs to fit your desired drilling application.

  • DL Annular BOP equipment
    DL
    Annular BOP

    Close on drillpipe or large tubulars without reducing operating pressure. View link button arrow

View All link button arrow

Drill-Thru Connectors

Connectors for BOP stacks.

  • EVO-Con Adaptable Collet Connector 3D Model
    EVO-Con
    Adaptable collet connector

    Combine the versatility and capacity of offshore drilling connectors with the ability to work on any wellhead. View link button arrow

  • HCH4 Collet Connector 3D Model
    HCH4 Collet Connector
    Engineered specifically to fit mandrel-style hubs

    Allows the HC-style connector to lock onto an H4 wellhead and maintain a direct load path. View link button arrow

  • HC Collet Connector 3D Model
    HC
    High-capacity collet connector

    Withstand separating forces in offshore drilling environments. View link button arrow

  • DWHC Collet Connector 3D Model
    DWHC
    Deepwater, high-capacity collet connector

    Stand up to the high loads encountered in ultradeepwater applications. View link button arrow

  • Model 70 Collet Connector 3D Model
    Model 70
    Collet connector

    Form a tight seal while withstanding bending stresses and separating forces. View link button arrow

View All link button arrow

Deepwater Integrated MPD Riser Joint

Higher service quality and lower cost of ownership.

Marine Drilling Riser

Equip your offshore operation with complete riser systems—from the drillfloor to the BOP stack.

Diverters

Direct wellbore fluids away from the immediate drilling area on offshore rigs.

BOP Control Systems

Drilling control systems for land, platform, and subsea applications.

  • Mark IV-HA High-Availability Subsea BOP Control System Model
    Mark IV-HA
    High-availability compact subsea multiplex control pod

    Safeguard your operations against costly downtime with enhanced reliability and availability. View link button arrow

  • Rendering showing that the system needs two subsea pressure intensifiers installed on the stack.
    Subsea Pressure Intensifier
    For new-build rigs or retrofit

    Maximize the working pressure of subsea mounted accumulators. View link button arrow

  • MARK III Subsea Multiplex Control Pod 3D Model
    Mark III
    Subsea multiplex control pod

    Increase modularity and simplify maintenance for greater subsea command. View link button arrow

View All link button arrow

Shear Rams

Provide dependable isolation or sealing of the wellbore.

  • BroadShear ram 3D model
    BroadShear
    Off-center tool joint shear rams

    Shear tool joint hardbanding and off-center tubulars. View link button arrow

  • CDVS-II Cable Double-V Shear Ram 3D Model
    CDVS-II
    Cable double-V shear rams

    Increase shear blade width compared with standard version. View link button arrow

View All link button arrow

Pipe Rams

Form a reliable seal on tubulars.

  • Pipe ram 3D model
    Pipe Rams
    Fixed-size sealing of tubulars

    Form one-half of a ram cavity's seal with the packer, top seal, and ram body acting in unison. View link button arrow

  • Variable-Bore Rams 3D Model
    Variable-Bore Rams
    Variable-bore rams that seal on a wide range of pipe diameters

    Enable sealing a standard BOP on several different pipe diameters. View link button arrow

View All link button arrow

Ram-Type BOPs

Contain wellbore pressure during critical control operations.

  • TL Ram-Type BOP 3D Model
    TL
    Offshore ram-type BOP

    Extend proven high-quality, reliable BOP design expertise to a lighter-weight design. View link button arrow

  • EVO Ram-Type BOP 3D Model
    EVO
    Compact, offshore ram-type BOP

    Combine engineering simplicity, footprint and operational savings, and superior reliability. View link button arrow

  • 25,000-psi ram-type bop 3d model
    25,000-psi Ram-Type BOP
    Ultrahigh-pressure BOP

    High-pressure completion performance in 25K pressure environments. View link button arrow

  • BroadShear ram bonnet assembly 3D Model
    Bonnet Assembly Options
    Designed specifically for our equipment

    Employ more closing force with greater certainty in a smaller footprint. View link button arrow

View All link button arrow

Drilling Manifolds and Chokes

Improved pressure and flow control in onshore and offshore applications.

  • Cement manifold equipment
    Cement Manifolds
    Designed and manufactured to your requirements

    Divert flow of cement slurry during cementing operations. View link button arrow

  • Choke and Kill Manifolds 3D Model
    Choke and Kill Manifolds
    From noncorrosive to extreme sour oil and gas

    Manage well pressure fluctuations encountered during drilling. View link button arrow

  • Mud Standpipe Manifold 3D Model
    Mud Standpipe Manifolds
    Full certification to global standards

    Bleed pressure, reduce shock, and divert drilling fluid flow. View link button arrow

  • Employee looking at MPD Manifolds on his computer screen.
    MPD Manifolds
    Customized manifolds

    Take precise control of pressure and flow in any operation requiring a choke. View link button arrow

  • Dog-in-window design of the compact insert-retrievable choke valve.
    Chokes
    Drilling, subsea, and production

    Manage wellbore pressure to maintain control in the event of a gas kick. View link button arrow

View All link button arrow