Phoenix xt175 High-Temperature ESP Monitoring System | Schlumberger

Phoenix xt175

High-temperature ESP monitoring system

Maximum operating pressure of 6,500 psi [44.8 MPa]
Gauge intake temperature up to 347 degF [175 degC]

Improve ESP run life and system integrity

The Phoenix xt175 high-temperature ESP monitoring system for electric submersible pumps (ESPs) monitors downhole pressure, temperature, current leakage, and vibration, providing comprehensive data needed to protect ESP system integrity and optimize well performance.

Collect and transmit data

This system incorporates state-of-the-art, high-temperature microelectronics and reliable digital telemetry. It is manufactured to rigorous standards and is qualified for use in high-temperature and harsh environments. Phoenix xt175 system provides fast, reliable, accurate information for analysis of artificial lift performance. The electrical system has a tolerance for high phase imbalance and the capacity to handle voltage spikes.

Compatibility
Full compatibility with other monitoring and control technologies
Configuration
Programmable trip and alarm relays for all parameters monitored
Storage
Data logger with memory for storing historical data
Integrated Technologies Produce Gas from Methane Hydrates for 24 Days
REDA Maximus install-ready ESP motor uses multiple gauges, including the WellWatcher Quartz Extend AC- or DC-powered high-resolution dual-sensor PT gauges and the Phoenix xt150 ESP monitoring system gauges, to produce continuous methane gas.
Read case study

Configure options

Phoenix xt175 system gauges are available in two configurations. Both measure intake pressure and temperature, motor oil or motor winding temperature, vibration, and current leakage. One also measures pump discharge pressure, which is used in evaluating pump performance.

Monitor and control

Either the UniConn universal site controller or the Instruct acquisition and control unit can be connected to the Phoenix xt175 system to provide remote access and control from a single platform. The data can be further integrated with the Lift IQ production life cycle management service for 'round-the-clock surveillance of all monitored parameters via satellite.

The system is compatible with SCADA systems and has a Modbus protocol terminal with RS232 and RS485 ports for continuous data output.

Phoenix XT 150 Gauge
View All

Share This