Flow Iron Pup Joints | 1502 Treating Iron | SLB
Home Completions Stimulation Frac and Flowback Equipment Flow Iron Pup Joints

Flow Iron Pup Joints

Reliable pup joints for well service applications

Frac Flowback Equipment on Rigsite
Working pressure: up to 15,000 psi [103 MPa]
Sizes: 2 or 3 in

Manage lifetime costs for hydraulic fracturing, cementing, well testing, and flowback

Flow iron pup joints from Cameron deliver maximum total life cycle cost savings, even in the oil and gas industry’s most demanding applications. For all of your flow iron requirements, from high-stage-count hydraulic fracturing to cementing, well testing, and even abrasive flowback, you can count on Cameron for high reliability and low cost.

Pup joints to enable efficient and reliable wellsite configurations

Cameron offers flow iron pup joints in standard 2- and 3-in sizes and lengths from 2 to 10 ft with 1502 hammer wing unions and nonpressure seal threads (NPST).

Cameron 2-in pup joint.
Cameron 2-in pup joint.

Flow Iron Fittings

Reliable fittings for well service applications

Manage total life cycle costs for hydraulic fracturing, cementing, well testing, and flowback.

Flow Iron Swivels

Reliable swivels for well service applications

Manage total life cycle costs for hydraulic fracturing, cementing, well testing, and flowback.

Flow Iron Plug Valves

Reliable plug valves for well service applications

Manage total life cycle costs for hydraulic fracturing, cementing, well testing, and flowback.

View All link button arrow link button arrow

Product Sheet Flow Iron Pup Joints

Maximize total lifecycle cost savings, even in demanding fracturing, flowback, cementing, and well testing applications.

Helpful links
plus to expand helpful links tray
minus to hide helpful links tray
About SLB
plus to expand about tray
minus to hide about tray
Copyright © 2023 SLB. All rights reserved.