Clif Mock True Cut LGS-1 gas or liquid sampler
Pneumatically operated sampler
Applications
- Sampling gases and light or refined liquids
Benefits
- Acquire samples that are representative of the pipeline contents
- Adjust sample frequency and size as required
Features
- Pneumatic operation
How it improves performance
The Clif Mock True Cut™ LGS-1 gas or liquid sampler uses a pneumatic positive displacement pump to transfer samples into a vented receiver or pressure-balanced piston cylinder. A purge valve manifold enables easy connection to process piping, including fast-loop connections. Sample size is conveniently set by adjusting the knob at the top of the sample pump to a predetermined height above the flat surface of the pump. This height directly corresponds to the sample size.
| Pump Specifications | |
| Sample Size | Liquid: 0.25 cc to 1.25 cc |
| Gas: 0.05 cc to 1.00 cc | |
| Maximum Sampling Frequency | -15° F to 375° F (-26° C to 190° C) |
| Maximum Operating Pressure | 1500 psi (200 bar) |
| Working Pressure of Sampling Media | 30 to 1,500 psi (2 to 103 bar) |
| Process Fluid Connections | Inlet: 1/2” NPT male |
| IK degree of protection | Outlet: 1/4” NPT female |
| Maximum Fluid Viscosity | 100 centistokes |
| Ambient storage temperature | 14 to 122 degF [–10 to 50 degC] |
Note: For applications requiring other specifications, contact SLB.
