Gear Operators

Suitable for any application that requires valve operation. View

For automated valves (pneumatic, hydraulic, or electric) requiring lockout capability to prevent valve rotation. View

Used on emergency shutdown valves while they flow process fluids and full-stroke valve testing isn’t practical. View

Enables manual operation of an automated valve (pneumatic, hydraulic, or electric) in a contingency. View

Enables manual operation of an automated valve (pneumatic, hydraulic, or electric) in a contingency. View

20 different frame and spur combinations. View

Commercial-grade, worm-geared, and made for multiple output turns. View

Aluminum standard housing material. View

Meet marine, submerged, and high- and low-temperature requirements. View

Meet AWWA Spec C504. View

300 series stainless steel unit housings, covers, indicators, and more. View

Avoid inadvertent handwheel rotation. View

Worm-gear solutions that minimize effort. View

Requiring reduced number of turns, rim pull, and handwheel size for manual operation of automated valves. View

Withstand high pressures at deepwater depths with Maxtorque high-performance valve products. View

Used where a nonself-locking mechanical advantage or change in input drive orientation is required. View

For a wide range of SLB and third-party valves. View

Avoid inadvertent handwheel rotation. View

For when valves or dampers must be opened/closed to same position. View

Reduce turns to close and rim pull by 75% in critical environments. View

See our MAXTORQUE products for rising stem applications. View

6- to 48-in sizes, many in recessed or flat versions. View