Wireline Formation Testing | Schlumberger
Contact
Home Reservoir Characterization Surface and Downhole Logging Wireline Openhole Logging Wireline Formation Testing

Wireline Formation Testing

Formation pressure, downhole fluid analysis, fluid sampling, and sidewall coring

Contact an Expert
Related Documents

Understand the fluid contents to understand your reservoir

Determining how fluid behaves in the reservoir requires collecting data at reservoir conditions. Our broad range of industry-leading products and services makes it possible to efficiently accomplish downhole pressure measurement and representative fluid analysis and sampling in what are challenging environments for conventional technology: low-permeability or unconsolidated formations, heavy oil, and rugose boreholes.

Formation evaluation sampling

Without formation testing to acquire pressure and fluid measurements and samples, you cannot fully characterize your reservoir and maximize production.

Wireline Formation Testing Offerings

MDT Forte and MDT Forte-HT
Rugged and high-temperature modular formation dynamics testers
Minimize operating risk, maximize efficiency, and sample confidently with qualified ruggedized and high-temperature platforms.
Single-Phase Fluid Sample Collection
Maintaining reservoir conditions for PVT samples
Recover single-phase samples, representative of downhole formation conditions for accurate compositional and PVT analysis.
SRFT
Slimhole repeat formation tester
Accurately conduct pressure measurements and fluid sampling in small-diameter boreholes.
CFA
Composition fluid analyzer
Get accurate optical measurements of hydrocarbons and water content.
LFA
Live fluid analyzer
Analyze formation fluid as samples are flowed to the MDT tester to capture single-phase samples and differentiate oil types.
Low-Shock Sampling
MDT tester technique that limits pressure drawdown to mitigate shock effects
Limit pressure drawdown during fluid extraction and sampling to obtain critical data for optimized well tests and facility design.
Permeability Anisotropy Measurements
Vertical interference testing with the MDT formation dynamics tester
Increase the length scale by obtaining permeability and anisotropy away from the wellbore to better understand reservoir heterogeneity.
PressureXpress-HT
High-temperature reservoir pressure service
Make fast, accurate pressure and mobility measurements in high-temperature environments.
PressureXpress
Reservoir pressure while logging service
Achieve fast, accurate pressure and mobility on the first logging run.
MDT
Modular formation dynamics tester
Accurately measure real-time reservoir pressure and permeability and collect high-quality, representative fluid samples.
Reservoir Pressure While Logging
Fast, accurate pressure and mobility
Perform reliable and efficient pressure measurement―in less than a minute.
View All

Industry Article Schlumberger Technologies Provide Critical Reservoir Insight For Ambitious Deepwater GOM Project

The Gulf of Mexico’s Stampede deepwater oil and gas field currently being developed by Hess holds significant potential. However, the challenges of reservoir development made the path to initial production especially complex.

Case Study HydraGlyde Fluid System Meets Efficiency and Financial Challenges of Argentina Exploration Well

High-performance drilling fluid enables efficient drilling and logging operations while reducing costs for each section by 2% and 14%, respectively.

Case Study Saturn Radial Probe Collects Fluid and Measures Pressure at 0.05-mD/cP Mobility in 6-in Caspian Sea Well

Oil samples and extended buildup in only 4.5-h total time on station in subsalt carbonate reservoir saves rig time and mitigates operational risk.

Case Study Petrel Reservoir Engineering and ECLIPSE Simulator Improve the Static Model for Production Simulation

Thorough data QC enables Alamein Petroleum Company to proceed with confident model initialization, history matching, and field development planning.

Case Study One-Run In Situ Stress Testing by Microfracturing Guides Hydraulic Fracturing, Antelope Shale

MDT tester in dual-packer configuration isolates intervals for measurements to calibrate mechanical properties from sonic logs, San Joaquin Valley.

Case Study MaxPull System Pulls >29,300 lbf to Free Stuck Tester, Saving USD 3,050,000

High-pull capability using TuffLINE 30000 cable avoids 4-day fishing job in tortuous well profile and loss of data.

Share This