M-I SWACO Fluid Treatment & Recycling | Schlumberger
Contact
Home Drilling Drilling Fluids and Well Cementing Solids Control Fluid Treatment & Recycling

Fluid Treatment & Recycling

Reduce drilling waste streams and HSE risks

Download Catalog
Contact Us
Related Documents
M-I SWACO employee fitting hose into orange tank.

In addition to drilled cuttings, multiple fluid streams—contaminated drilling fluid, slop, tank bottom sludge, and more—are generated during drilling and intervention. These fluid streams may include valuable components that, when properly separated, you can recycle.

M-I SWACO fluid treatment and recycling technologies are fit-for-purpose innovations that help you reduce your drilling waste streams, their HSE risks, and the cost of replacing resources.

Fluid Treatment & Recycling Offerings

PRESSURE & FLUID MANAGEMENT SYSTEM
Coiled tubing application technology
Precisely control pressure in coiled tubing, drilling, completions, or any other critical operation.
ENVIROUNIT
Offshore slop water treatment system
Reduce offshore drilling waste stream by up to 90%.
RHE-USE
Two-stage centrifuge system
Remove low-gravity solids and produce clean fluid for reuse in drilling systems.
ATC
Automatic tank-cleaning technology
Minimize HSE risks of manual tank cleaning and confined space entry.
View All

Tech Report Automatic Tank-Cleaning Technology Eliminates Pit Entry and Reduces Cleaning Time by 30%

High solids volume removed in less time than with manual cleaning methods.

Tech Report ATC Technology Cuts Clean-Up Time in Half

The ATC technology cleaned the tank in 250.48 h, representing a 50.3% reduction in cleaning time.

Case Study Haynesville Operator Reduces Low-Gravity Solids by More Than 65%, Saving USD 120,000

RHE-USE two-stage centrifuge system ensures high drilling performance while saving 1,300 bbl of diesel.

Case Study ENVIROUNIT System Helps Save USD 9.8 Million on 16-Well Operation Offshore Mozambique and Tanzania

Efficient slop water treatment saves costs, reduces HSE footprint, and enables overboard disposal within regulatory requirements.

Case Study Cuttings Reinjection Using Enhanced Pretreatment Saves USD 6.5 Million in Waste Management Costs

High-speed grinding mill and MONGOOSE PRO shakers enable reinjection of active rig waste and stored drill cuttings with no NPT in sensitive environment, Alaska.

Case Study ENVIROUNIT System Saves Total E&P USD 6 Million in Slop Water Processing Offshore Republic of Congo

Slop water treatment system reduces waste stream by 97% during first 14 months and 18 wells on a 45-well deepwater development project.

Share This