Integrity ASV | SLB

Integrity ASV

Annular subsurface safety valve

Pressure rating

Up to 6,500 psi [45 MPa]

Temperature rating

300 degF [149 degC]

Validation

ISO 14310 V0, API Spec 14A V3-A, and TR2385 compliant

Applications

  • Gas lift wells
  • Salt dome debrining wells

Benefits

  • Operational efficiency with fully integrated large-bore concentric design that enables single-trip installation and retrieval
  • Enhanced protection through fail-safe closure of the annulus when required

Features

  • Fail-safe-closed sleeve mechanism with 360° line of contact when closed
  • Metal-to-metal primary seal and nonelastomeric secondary seal on the seat
  • Rod piston with nonelastomeric hydraulic seals for valve actuation
  • Option to set the integrated packer with tubing or control line pressure
  • Barrel slip design with large footprint that enables use in unsupported casing
  • Multiple feedthrough ports for control line bypass
  • Gas injection rates up to 10 MMcf/d
  • Annulus bypass flow area of 3.27 in2 [21.1 cm2] for injection

How it improves performance

Integrity™ ASV annular subsurface safety valves are validated to API Spec 14A (13th edition) V3-A, but their performance far exceeds the certification requirements for both barrier and hydraulic actuator integrity. They can be installed and retrieved in a single trip.

Setting flexibility
The integrated packer is set by pressuring up a dedicated hydraulic control line from surface, which eliminates tubing movement during the setting process. It can also be configured with a setting mandrel that enables conversion to traditional setting with tubing pressure. By placing a plug in the tubing below the Integrity ASV valve and plumbing the setting port to the setting mandrel, tubing pressure can be increased and communicated to the setting chamber for a more traditional packer setting sequence.