Stuck Pipe Spotting Fluid for Invert Emulsion Fluids PIPE-LAX OB Field Trial

Challenge: A drilling program in Eastern Venezuela called for the use of an all-oil diesel oil-based mud (OBM) in a formation comprised of mostly shale (90%) and some sandstone. 

Solution: SLB engineers recommended PIPE-LAX OB, a spotting fluid designed to free stuck drillstrings when using invert-emulsion fluids.

Results:

• PIPE-LAX OB degraded the filter cake faster and more effectively than previously used traditional pills.
• The use of the PIPE-LAX OB pill circumvented the need for a sidetrack and the loss of the bottom-hole assembly (BHA), valued at approximately $250,000.

The Situation

A drilling program in Eastern Venezuela called for the use of an all-oil diesel oil-based mud (OBM) in a  formation comprised of mostly shale (90%) and some sandstone. Historically, these wells have been troublesome due to wellbore instability caused by mechanically unstable shale as well as mud density management across a wide range of pressure required for hole stability. 

The Solution

SLB engineers recommended PIPE-LAX OB, a spotting fluid designed to free stuck drillstrings when using invert-emulsion fluids. PIPE-LAX OB fluid is a single-package, liquid blend made for fast mixing and frees the drillstring by penetrating through and cracking the filter cake to free differentially stuck pipe.

The Results

PIPE-LAX OB degraded the filter cake faster and more effectively than previously used traditional pills. The use of the PIPE-LAX OB pill circumvented the need for a sidetrack and the loss of the bottom-hole assembly (BHA), valued at approximately $250,000.

Lab tests indicated that the spotting fluid remained active after 30 hr of exposure and showed no compatibility issues with OBM products.

The Details

A 13.7 lb/gal PIPE-LAX OB pill was mixed using 10.4 bbl of PIPE-LAX OB and 307 lb/bbl of barite. The 12.6 bbl pill at was spotted in the annulus, pressured up to 200 psi for 5 min, allowed to soak for a couple of hours. The washpipe was pulled out of the hole and run in hole with fishing string, bumper sub + jar + accelerator + 5 in. drill pipe. It was latched to the fish at 7,756 ft; after overpulling the pipe at 230,000 lb the fish was dragged to surface and retrieved.

The lab testing protocol was as follows.

• Run API fluid loss on OBM (base fluid), quantify cumulative volumes in cc for each 15 min interval up to 60 min
• Clean up filter press while keeping wall cake intact
• Add treatment fluid to API filter press cell with wall cake intact
• Run API fluid loss
• Check spurt loss and quantify volumes in cc for each 15 min interval up to 60 min
• Repeat procedure for all samples of treatment fluid and compare results

Questions? We’ll be glad to answer them.

If you’d like to know more about the PIPE-LAX OB product and how it’s performing for our other customers, please call the SLB office nearest you.