Challenge: Circulate cement to surface despite depleted zones, natural fractures, and unconsolidated sandstone.
Solution: Use CemNET advanced fiber technology to control losses.
Results: Met top-of-cement requirements faster
and more cost-effectively while eliminating remedial work.
While drilling in a field near Bakersfield, California, in the San Joaquin Valley, Chevron experienced problems circulating cement to the surface. Depleted zones, natural fractures, and unconsolidated sandstone in the reservoir led to severe circulation losses that were negatively impacting operational efficiency and costs. In addition, Chevron encountered oil and gas migration problems that required remedial treatments.
Chevron had been using foam cement to combat these problems. This method typically circulated cement to the surface and prevented unwanted flow, but it was complicated and costly. After learning that another operator had used CemNET fiber cement from SLB in a nearby field with great success, Chevron decided to apply the technology in its wells.
CemNET fiber technology incorporates special inert fibers that seal off areas prone to fluid loss. Teams first pumped Losseal W/O fibers in a spacer fluid—curing losses while the filtercake was being removed. Then Chevron added CemNET fibers to a low-rheology cement slurry. This filled lost circulation areas during cement placement. The low-rheology formulation reduced friction pressure, which decreased the bottomhole pressure exerted on the formation.
CemNET fiber cement helped Chevron eliminate fallback and topouts while circulating cement to the surface. It also enabled the operator to eliminate the high costs and special tools associated with foam cement jobs.
Additional SLB innovations enhanced cementing operations
In addition to CemNET technology, Chevron also applied
Chevron improved operations and saved USD 3.3 million
CemNET fiber technology enabled Chevron to overcome lost circulation problems, reach required top of cement, and avoid the time and costs of remedial cement treatments. This generated approximately USD 3.3 million in value. Now Chevron uses this technique to improve the effectiveness and efficiency of cement jobs in other locations.
