SCREEN PULSE Fluid and Cuttings Separator | Schlumberger

SCREEN PULSE

Fluid and cuttings separator

Retrofitted to fit existing shale shakers
Onshore or offshore rigs
Simple installation and operation
Small footprint and minimal personnel required
Fully pneumatic
Nonelectrical operations
Recovered fluids remain in system
Drilling fluid recovery up to 25 bbl/d

Fully pneumatic system

The SCREEN PULSE fluid and cuttings separator is a retrofitted, fully pneumatic operated system that creates a pulsating suction below the last screen at the discharge end of the shaker, separating the free fluid from the cuttings and generating significantly drier drill cuttings.

Efficient design and operation

An automatic pneumatic control panel operates the SCREEN PULSE separator on up to four shakers simultaneously. The system uses a lightweight pan installed as a drop-in, within the shaker bed underneath the screen. An air valve mechanism is attached to the pan creating a gentle suction on top of the screen, pulling all the residual drilling fluid from the screens surface and the drilled cuttings as they travel toward the discharge end of the shaker.

Combined with a DURAFLO composite replacement screens, this reduces waste treatment, transportation, and disposal fees. By optimizing fluid recovery, the SCREEN PULSE separator transforms what would normally be wasted into a valuable commodity

SCREEN PULSE fluid and cuttings separator

Optimized recovery

Combined with our patented shaker technology and high-capacity lightweight composite screens, the SCREEN PULSE fluid and cuttings separator optimizes efficiency, improves rigsite safety, and significantly reduces overall drilling costs.

SCREEN PULSE fluid and cuttings separator On and Off
SCREEN PULSE
Fluid and cuttings separator
View All

Share This