Valve Applications

Cast-iron construction. View

Prevent valve rotation. View

For use in automated quarter-turn valve applications. View

Visually indicate the position of a buried or otherwise hidden valve. View

6- to 48-in sizes, many in recessed or flat versions. View

For spring-return applications. View

Used with pneumatic, hydraulic, and backdrivable electric actuators. View

Commercial-grade, worm-geared, and made for multiple output turns. View

Meet AWWA Spec C504. View

Aluminum standard housing material. View

Meet marine, submerged, and high- and low-temperature requirements. View

300 series stainless steel unit housings, covers, indicators, and more. View

20 different frame and spur combinations. View

For aggressive environmental conditions or corrosive applications. View

Use as add-on features to gears or as stand-alone products. View

Avoid inadvertent handwheel rotation. View

Avoid inadvertent handwheel rotation. View

Achieve dependable, heavy-duty performance in abrasive service conditions. View

Meet the 7,500-psi working pressure demands of deep well drilling. View

2- to 36-in, one-piece body. View

2- to 12-in, short-neck design. View

2 to 12 in, for a range of industries. View

14 through 36 in, available in both wafer and lug styles. View

Optimize operations in corrosive CO2 injection and waterflood applications. View

1/4- to 2-in sizes, 2,000-psi max. operating pressure. View

1/4- to 2-in sizes, 150-psi saturated stem. View

Two-piece threaded-end ball valve, full port, 2,000-psi working pressure. View

Three-piece, threaded-end economy ball valves, fire tested and inline repairable. View

Cast-iron construction. View

Prevent valve rotation. View

For use in automated quarter-turn valve applications. View

Visually indicate the position of a buried or otherwise hidden valve. View

6- to 48-in sizes, many in recessed or flat versions. View

Avoid inadvertent handwheel rotation. View

Avoid inadvertent handwheel rotation. View

For when valves or dampers must be opened/closed to same position. View

Commercial-grade, worm-geared, and made for multiple output turns. View

Meet AWWA Spec C504. View

Aluminum standard housing material. View

Meet marine, submerged, and high- and low-temperature requirements. View

300 series stainless steel unit housings, covers, indicators, and more. View

20 different frame and spur combinations. View

For aggressive environmental conditions or corrosive applications. View

Used with pneumatic, hydraulic, and backdrivable electric actuators. View

For spring-return applications. View

Use as add-on features to gears or as stand-alone products. View

Small-bore valve designed for use in piping systems. View

1 1/2- to 4-in sizes, ANSI 150 to 1500. View

6- to 60-in sizes, ANSI 150 to 1500. View

1 1/2- to 20-in sizes, ANSI 2500. View

2- to 60-in sizes, ANSI 150 to 2500. View

1/2- to 12-in sizes, ANSI 150 to 1500. View

1 1/2- to 60-in sizes, ANSI 150 to 2500. View

Overcome ball flexing to 10,000 psi. View

Save valuable space with one of the smallest compact actuators on the market. View

Achieve on-off modulating control of multiple valve types. View

Reliably perform with compressed air, natural gas, or nitrogen actuator supply. View

Ensure reliable valve shutdown when an external powersource is unavailable. View

Choose from double-acting or spring-return designs for shallow or deep water. View

Reduces rim pull by up to 75%. View

See our MAXTORQUE products for rising stem applications. View

Reduce turns to close and rim pull by 75% in critical environments. View

Withstand high pressures and deep water depths with MAXTORQUE products. View

Extend valve life and reduce NPT and downtime. View

75% less work to operate a valve. View

Full- and reduced-port designs, ASME 150 to 2500. View

Robust design, sealing areas, and stainless steel overlays. View

Save repair time and money with top-entry, infield- repairable designs. View

Cast-iron construction. View

Prevent valve rotation. View

For use in automated quarter-turn valve applications. View

Visually indicate the position of a buried or otherwise hidden valve. View

6- to 48-in sizes, many in recessed or flat versions. View

Avoid inadvertent handwheel rotation. View

Avoid inadvertent handwheel rotation. View

For when valves or dampers must be opened/closed to same position. View

Meet AWWA Spec C504. View

Aluminum standard housing material. View

Meet marine, submerged, and high- and low-temperature requirements. View

300 series stainless steel unit housings, covers, indicators, and more. View

20 different frame and spur combinations. View

For aggressive environmental conditions or corrosive applications. View

Used with pneumatic, hydraulic, and backdrivable electric actuators. View

For spring-return applications. View

Use as add-on features to gears or as stand-alone products. View

Small-bore valve designed for use in piping systems. View

1 1/2- to 4-in sizes, ANSI 150 to 1500. View

6- to 60-in sizes, ANSI 150 to 1500. View

1 1/2- to 20-in sizes, ANSI 2500. View

2- to 60-in sizes, ANSI 150 to 2500.